Originally Posted by Keith Atlanta (Post 2787516)

There is a fine line between blow out and another 1/2 to 1 inch and you are decreasing top end. Try 5 blades from BBlades? Or let me know, I have a set of 1/2 inch spacers you can borrow for your current set up. The IMCO lowers slowed me down. Get some help from Smitty, Fleg and Jay Tee. They all had great ideas and knew their stuff when I was fooling with Baja ext boxes. Start now, it takes a couple months of fooling around to dial it in...

Originally Posted by irishtornado (Post 2787851)

Running stock 496HO power???

Originally Posted by JasonSmith (Post 2787969)

Sure. It wouldn't scare me at all, knowing what I know now. Besides, you can always go down with spacers, it is the shortening up part that is a b!tch.

Originally Posted by JaayTeee (Post 2787977)

First your trailers missing, now you want to
get rid or all the stuff hangin off the back
....something smells fishy here:D

Originally Posted by JasonSmith (Post 2787980)

I don't want to get rid of anything on the back except for a bunch of weight. I think I have that figured out.

Originally Posted by JasonSmith (Post 2787980)

I don't want to get rid of anything on the back except for a bunch of weight. I think I have that figured out.

Originally Posted by JaayTeee (Post 2788066)

U re-rigging it with these:D

http://www.mercurymarine.com/engines...ives/vazer.php

Only 573 #'s

Originally Posted by irishtornado (Post 2788044)

So you want to sell your hardware?

Originally Posted by JasonSmith (Post 2788074)

I may be selling my engines, but I can't say 100% for sure yet.