Looking for the berber Baja used
 

I'm looking for the berber Baja used for the snap in carpet used in the Outlaws. I was wanting to make some pieces for the footrests in front of the bolsters. Also where could I get some grey carpet to do some custom work in the cabin?

xt -innovations should be able to help you with that. They are working on the skins for my engine hatch for me.

Redbud,

Baja never used a "berber" carpet in the Outlaw models. It was either a 40 oz. "cut pile" (Red, Purple, or Blue) carpet, or a 28 oz "cut pile" Carbon Fiber pattern multi-Gray carpet?
I am ordering some of the Carbon Silver carpet for another job next week, if that is what you are looking for? Email me at [email protected]

XT:cool:

Keith,

As you know we have matched your vinyl color real close, but we are still having problems matching the same "custom" texture as the Grand Prix edition used. I am going to see if it is possible to re-run a close (color) matched vinyl, through the embossing process to give it the same texture as the rest of your boat. The only problem with this, is it may cost as much as if we just recovered your entire cockpit interior, or more?
I will keep you posted.

XT:cool:

look up [email protected] they have all the carpet and patterns for baja
Tim