30 Outlaw Owners
 

I am looking for the measurments on the stickers on the side of the hull. From the tip of the "B" to the tip of the "a" of the decal on your boat. Any help with this would be great.

Thanks XT for telling me where to measure from. Only problem is the stickers have been removed.

The reason Dave needs the measurement is because there were 3 or 4 different sizes depending on the graphic. You need to find a 30ol of the same year with the same graphic as yours to get the measurement. I can tell you mine is the 60" long version but that is for an 05 outlaw graphic. Is that your boat in the Avatar? If yours is an Outlaw graphic, which it looks to be in the avatar, tell Dave 60".

I was hoping Dave would have remembered my boat from last year. I can't remember if it was the Outlaw or the SST Graphics. I'll have to post a side pic of the boat.

Picture from the side.

14" rims on the trailer, looks to be about 2 rims wide. Tell Dave it is the 30" decal !

Well here are the actual sizes that we used on the Baja script logos: 20", 24", 32", 42", 50" and 60".

The decal in question appears to be the 32 or 42 inch in Purple. I will start looking for some inventory, but I can still order them from the original vendor.

P.S. They are SST graphics....

XT:cool:

Just did some scaling on the 'puter. It is a 32". My 60" decal only measures about 58".

I just talked with Brian41 yesterday, and he has alot of Baja logo inventory also. If I order them new, I have to order $150.00 worth of decals (min.) order. PM Brian to begin with, and if he cannot help I will order them, and keep a little stock on-hand.

XT:cool:

Sounds good. I had thought they were SST graphics. Thanks for the info I will look into it and see what I can find out.