![]() |
Baja 35 by Fountain? ??? Who has one?
Who has a 35 Outlaw Baja by Fountain with 496 Mag Ho's?
How fast is it? 75? 80? I know a 35 BBB (Baja by Beak) with 525's will run 84mph, just wondering how fast one with HO's will run. Thanks.:party-smiley-004: |
35 outlaw
09
|
Wally at Kellys' Port LOTO. They have one. He says it runs 76.
|
Jason,
The Fountain 35 ran 84 like you said, but my 35 by Brunswick will run 84 also in perfect conditions. Just like they probably did to get 84. So the 76 with HO's seems to be a little bit of a push. But they did tell me that. |
redbud ,,i know you where thinking about shorties,,,but didnt know if they would work,,,,iam looking at the cigs,,,gladiator or top gun and see what works for them,,,if you look at the bottom of the boat,,it looks close to the 35 outlaw bottom,,with the notch and all, ,,looks like a lot of the cig are running the shorties:cool:
|
Originally Posted by TWIN-SPINS
(Post 2943452)
redbud ,,i know you where thinking about shorties,,,but didnt know if they would work,,,,iam looking at the cigs,,,gladiator or top gun and see what works for them,,,if you look at the bottom of the boat,,it looks close to the 35 outlaw bottom,,with the notch and all, ,,looks like a lot of the cig are running the shorties:cool:
|
Originally Posted by redbud35
(Post 2943554)
That is why I think they would work. Just haven't found a set to "try". I've thought about doing nose cones. That is something to mess with over winter. I get out of the mood for mods in the summer. Didn't you do the Raylars?
|
Originally Posted by redbud35
(Post 2943554)
That is why I think they would work. Just haven't found a set to "try". I've thought about doing nose cones. That is something to mess with over winter. I get out of the mood for mods in the summer. Didn't you do the Raylars?
|
Originally Posted by TWIN-SPINS
(Post 2944766)
yes raylar,,,103 kits,,,i went with raylar because ,,when the time comes to refresh the engines,,,i will put in his forged internals,,bigger cam,,and e.c.m. reflash,,for the 625 h.p.,,,i can use the same heads and intake,,,kinda planed it from the start this way :drool:
|
labbed 30 ,,from bblades,,,,81mph,,,my rev limiter is lower than yours,,,,if i had to do the drive setup today,,,heres what i would do,,,go with extension boxes,,and the -2 imco,s,,,
|
| All times are GMT -5. The time now is 10:01 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.