![]() |
Engine Lid cover is coming apart at seems...
So I have noticed that the engine lid cover as been slowly ripping apart at some of the seems. I am sure this is due to both walking on and UV rays. My next question is how big of a job is this for a local shop to do? And should all the stiching on the pad be redone? Ballpark on costs?
|
http://www.xt-innovations.com did all the baja stuff
|
Originally Posted by Baja_man
(Post 2964122)
So I have noticed that the engine lid cover as been slowly ripping apart at some of the seems. I am sure this is due to both walking on and UV rays. My next question is how big of a job is this for a local shop to do? And should all the stiching on the pad be redone? Ballpark on costs?
|
Baja Man,
Have it done right! Send me a photo and I will get you a good price. Baja did switch to a better thread in 2006, but we are using even better "Tenara TR" tread on anything that we repair. [email protected] |
I would suggest having the wood liner replaced as well. They're notorious for becoming water logged and rotting.
|
Originally Posted by thisistank
(Post 2964503)
I would suggest having the wood liner replaced as well. They're notorious for becoming water logged and rotting.
|
Originally Posted by Baja_man
(Post 2964859)
Is there wood on an '04 25 OL under the padding? I know there is fiberglass but not sure about the wood.
|
2 Attachment(s)
On your 2004 there is plywood along the edge to staple the cover in place. Most models switched to a plastic "Prolite" material around 2006 that will not decay. Your's is probably ready to be replaced? The photos are of my 29 OL after only two seasons, and that is why we pushed to change to the higher priced Prolite material.
XT |
Mine is doing the exact same thing. More than the seems coming apart is the warping and wavy looking.
Thought about having my re-done as well. |
I had dave ( XTinovators ) do a 33 and
a 36 baja and it was a perfect match. If you want it done right give him a call. |
3 Attachment(s)
Originally Posted by five cent worth
(Post 2965012)
Mine is doing the exact same thing. More than the seems coming apart is the warping and wavy looking.
Thought about having my re-done as well. XT |
Originally Posted by XT-Innovator
(Post 2965147)
Is it as bad as this? I hope not, but we can fix just about anything on the interiors.
XT |
Originally Posted by XT-Innovator
(Post 2965147)
Is it as bad as this? I hope not, but we can fix just about anything on the interiors.
XT Are you guys doing that one? Maybe talk him into a cockpit cover to keep the snow out!:eek: |
Originally Posted by TEAMBAJA
(Post 2965176)
Are you guys doing that one? Maybe talk him into a cockpit cover to keep the snow out!:eek:
|
No, mine is not as bad as the picture shown but I really do not want it to get that far either. The fabric is fine, no rips, just seems to be ripping at a few of the seems with the worst being approx 6 inches long. I really do not need new fabric just a re-stitch. Might as well have it all re-done at the same time. I took it to a local canvas shop just to get a ballpark and they gave me an estimate of $225 to $350. The boat is in getting winterized currently and am undecided on whether to have this done this fall or simply wait until spring.
|
We had the vinyl sunpad on our old '05 275 completely restitched and it came out great. We also had the vinyl on the bench seat replaced (only the white part) and it matched the other seats within a month or so. You would be surprised how good a restitch (with better thread) will come out when done right. Paid around $300 local for the sunpad which included them coming out, taking apart the sunpad, and brining back the restitched vinyl and putting it back on.
|
I still not have fixed this and want it done over the winter.
XT, if I drop just the lid off over the winter what kind of turn around time are you looking at? I am not sure if I want to shrink wrap the boat with or without the lid on. |
Originally Posted by Baja_man
(Post 3253246)
I still not have fixed this and want it done over the winter.
XT, if I drop just the lid off over the winter what kind of turn around time are you looking at? I am not sure if I want to shrink wrap the boat with or without the lid on. XT |
Wayne, we could meet up and you could give me the lid. I will be driving down to XT in the near future when my interior is done, and I could drop it off for you... Save you the drive..
Let me know! |
Originally Posted by SmurfOnABoat
(Post 3253619)
Wayne, we could meet up and you could give me the lid. I will be driving down to XT in the near future when my interior is done, and I could drop it off for you... Save you the drive..
Let me know! |
Originally Posted by Baja_man
(Post 3253753)
That would work perfect!! When do you anticipate going down again?
|
Originally Posted by SmurfOnABoat
(Post 3253785)
Just need to give him the go ahead on colors. I would say sometime in Dec or Jan at the latest. I gotta bring my boat up to Daves, so we could meet there or something.
You getting closer on the color choice yet? XT |
Originally Posted by XT-Innovator
(Post 3253992)
Scott,
You getting closer on the color choice yet? XT |
Originally Posted by XT-Innovator
(Post 3253992)
Scott,
You getting closer on the color choice yet? XT Check your email! |
Originally Posted by Anchorman
(Post 3254012)
Blue silver and Black
|
Originally Posted by SmurfOnABoat
(Post 3253785)
Just need to give him the go ahead on colors. I would say sometime in Dec or Jan at the latest. I gotta bring my boat up to Daves, so we could meet there or something.
|
Originally Posted by Irishtornado
(Post 3254135)
I'm probably headed down there over Thanksgiving week if you want it to get there quicker get it down to me.
|
Originally Posted by SmurfOnABoat
(Post 3254181)
Always gotta one up me huh Dave! lol
|
Originally Posted by Irishtornado
(Post 3254241)
No feel free to take it...I can take the focus there if I don't have to haul anything..Don't worry you can pickup what I'm dropping off..
I could pick it up for you, but I wonder if there will be Salt? |
Originally Posted by Irishtornado
(Post 3254135)
I'm probably headed down there over Thanksgiving week if you want it to get there quicker get it down to me.
|
Originally Posted by Baja_man
(Post 3254415)
I dont need till next spring but if I swing it right I won't have to make a trip.....Are you going to leave fri or sat? I should be able to get to you before then.
|
Originally Posted by Irishtornado
(Post 3254453)
Depends on Dave@XT I don't know his schedule over holiday.
|
Originally Posted by Anchorman
(Post 3254484)
Mine is almost off you can come get it and bring it to XT if you want. I should have it off in the next few days. Then I just need to find a weekend to get it to him. Sounds like he will have several things to work on.
Irish, I will be around all weekend but I have get togethers on Thurs, and Sunday. No problem on Fri. and Saturday. Might be done on the 252 Islander that will be headed back to Cincinnati on the Holiday weekend also.... XT |
Originally Posted by XT-Innovator
(Post 3254917)
KY might add a couple miles to the trip??? Will, I could get my buddy with his diesel Chevy truck to come get the whole boat if needed. :sport009: He is out of work with nothing to do.
Irish, I will be around all weekend but I have get togethers on Thurs, and Sunday. No problem on Fri. and Saturday. Might be done on the 252 Islander that will be headed back to Cincinnati on the Holiday weekend also.... XT |
Originally Posted by Irishtornado
(Post 3254983)
Sounds like I'll be heading to Bucyrus on Saturday then. I'll call you to setup time to meet with you.
|
Originally Posted by TEAMBAJA
(Post 3255027)
Is this a "get your drinkin boots on" kind of trip or a Dock Holiday "hit n run" undetected kind of trip?:party-smiley-004:
Is it illegal to operate a golfcart in Bucyrus with a open bottle of Jager? |
1 Attachment(s)
Originally Posted by Irishtornado
(Post 3255033)
Is it illegal to operate a golfcart in Bucyrus with a open bottle of Jager?
|
Originally Posted by TEAMBAJA
(Post 3255045)
I think its just frowned upon, but Im pretty sure Im on thin ice in that dept. Im really surprised all my carts are in good shape after last weekend. :food-smiley-009:
|
Originally Posted by XT-Innovator
(Post 3254917)
KY might add a couple miles to the trip??? Will, I could get my buddy with his diesel Chevy truck to come get the whole boat if needed. :sport009: He is out of work with nothing to do.
Irish, I will be around all weekend but I have get togethers on Thurs, and Sunday. No problem on Fri. and Saturday. Might be done on the 252 Islander that will be headed back to Cincinnati on the Holiday weekend also.... XT |
Originally Posted by TEAMBAJA
(Post 3255027)
Is this a "get your drinkin boots on" kind of trip or a Dock Holiday "hit n run" undetected kind of trip?:party-smiley-004:
|
| All times are GMT -5. The time now is 06:41 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.