Official Baja Photo Thread
#54
Registered
iTrader: (1)
I purchased it without power (spun bearings) so I purchased a crate 454 425 HO. It had gil dry exhaust, I plan I reusing them. I basically have to go over everything. Powder coat exhaust, new transom assembly, K-planes are going on. Rear seat needs to be totally rebuilt. etc. I'm taking lots of pictures. Sanded down the outdrive, etching primer, then epoxy primer than enamel. Just finished that. Hopefully fiberglass work will be complete in a week or 2.
#55
Registered
Join Date: Apr 2010
Location: Lake Travis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
I purchased it without power (spun bearings) so I purchased a crate 454 425 HO. It had gil dry exhaust, I plan I reusing them. I basically have to go over everything. Powder coat exhaust, new transom assembly, K-planes are going on. Rear seat needs to be totally rebuilt. etc. I'm taking lots of pictures. Sanded down the outdrive, etching primer, then epoxy primer than enamel. Just finished that. Hopefully fiberglass work will be complete in a week or 2.
Do you plan on adding stringers or bulkheads? Or doing anything to the cabin?
Last edited by Crossett; 05-11-2012 at 11:10 PM.
The following users liked this post:
healingbarn1a (05-08-2022)
#59
Platinum Member
Platinum Member
iTrader: (6)
My old 33 OL with 540's
#60
Registered