Empire

Those motors are BEAUTIFUL

Nice Job

Mike wrote:
Thanks. I was hopping to get your shirt as i was heading to my boat last week, but i still have not received it. I will check the mail today and follow up. Hopefully we can meet in Havasu this year.:boat:

Baja 322 2 x 454 Mag MPI Procharger 600HP built from Mark-Precision Marine Engines. It runs 80 with 28`s on 5100 Rpm
Question: It will be faster with Imco Shortys?



http://www.offshoreonly.com/forums/a...6082009086.jpg

Mike wrote:
I know i have said it before, but i love that paint job

As Mike mentioned above the paint is beautiful. The colors are perfec and the design really compliments the hull.

Yes your boat should be faster with shorties. I would assume your "X" dimension is pretty deep so it will bring the props up and I think you have plenty of horsepower to benefit from them.

NICE

Thanks!
The design from the orange Stripes are stolen from a small Boat Company from Sarasota:evilb:

I'm running a 515" M3SC Procharged engine. Dyno'ed 843hp/830tq at 5600 rpm. I was running 87mph before but now I can't keep a drive together long enough to see how fast.

I think I COULD break into the triple digits by just putting on my smallest pulley as I have ran 99 mph with the 1057 hp pulley and it made 1115 w/the next smaller one BUT seeing the water next to my face sideways while still in the boat 2 years ago as it tried to spin out and eject me and my wife at 95 plus mph after violently bow steering kinda took away my desire to go that fast again :eek:,Smitty

540 w/afr heads,m-3sc turning waaaay past it's maximum rating,home modified mpi intake and throttle body,made 1115hp on crocketts dyno on 20% race gas/80% 92 octane,made 1050hp plus on 92 octane,made 657hp with blower belt off on second ecu we reprogrammed,Smitty

Smitty,

I thought that you did break the triple digit mark. Glad you survived to talk about it. Every hull has it's limit's and I think you have found the limit on the 272.

Thanks for posting the information.

Doc

This bad boy is not going in a Baja but is going in a single 28 footer.

Can you say 1100 HP!

Looks like a sewage treatment plant with all the piping to & from the intercooler.

just maybe my motor will be done in two weeks so I can post a pic.:coolcowboy:

I'm with you on that! Now that I could run in the 90'S it doesn't seen so important.....

Hi, this my ongoing rebuild and I should start it up in the next few weeks...
509 roller motor
1071 Mooneyham blower
Lee performance intercooler
2 1050 dominators......I don't know what psi yet but it should turn some good numbers
http://i75.photobucket.com/albums/i3...Attachment.jpg
http://i75.photobucket.com/albums/i3...t/CIMG0065.jpg
http://i75.photobucket.com/albums/i3...CIMG0007-1.jpg
http://i75.photobucket.com/albums/i3...t/CIMG0065.jpg

7....Wow, you would think there would be more

Dock
I just found out about the news on your boat. I am so sorry to hear that. I was hopping to receive one of your shirts and hopfully meat you this summer and have our boat for a run.

Be in touch, hope all is well