|
Full cover and cockpit cover for 232 closed bow
Hi,
Anyone got a full and or cockpit cover for a 232? Where can I get these at a reasonable price? Thanks |
Yes,
We have the original factory Baja patterns for both the Mooring, and Cockpit Cover offerings. We can make them in any Sunbrella color you like. We may even have a 23 Outlaw shipping, or trailering cover that we can sell for a little less cost? XT |
Originally Posted by XT-Innovator
(Post 3071736)
Yes,
We have the original factory Baja patterns for both the Mooring, and Cockpit Cover offerings. We can make them in any Sunbrella color you like. We may even have a 23 Outlaw shipping, or trailering cover that we can sell for a little less cost? XT |
Originally Posted by Irishtornado
(Post 3071768)
You can make the rachet type trailering cover? I don't care about the Baja logo.
Brian41 has these for less money than we can make one for. http://cgi.ebay.com/ebaymotors/Baja-...ssoriesQ5fGear We can make a custom 302 Mooring Cover in Sunbrella but it will cost $1200.00 in your choice of color. XT |
Originally Posted by XT-Innovator
(Post 3072369)
Dave,
Brian41 has these for less money than we can make one for. http://cgi.ebay.com/ebaymotors/Baja-...ssoriesQ5fGear We can make a custom 302 Mooring Cover in Sunbrella but it will cost $1200.00 in your choice of color. XT |
How about a trailering cover for a 272? I have seen them on ebay for 275 and 278, will either of these work?
|
Scott,
The 275 deck sits on the same hull design as the 272 (same hull mold) but the deck is a little taller. The 278 is a new hull design that I created at Baja, and is 27' 6" compared to 27' 2" long. Both covers will fit loose, but the 275 would be better! Note: The cleat holes, and fuel fill access on the Trailering Covers will most likely not line-up. The 275 Shipping cover should fit pretty decent? I have a couple 278 (black) Trailering, and some 275 Shipping covers if interested? XT |
Scott the 275 shipping covers fit pretty nice on the 272 i have one for mine and it looks like it was made for it Ed
|
Originally Posted by XT-Innovator
(Post 3074005)
Scott,
The 275 deck sits on the same hull design as the 272 (same hull mold) but the deck is a little taller. The 278 is a new hull design that I created at Baja, and is 27' 6" compared to 27' 2" long. Both covers will fit loose, but the 275 would be better! Note: The cleat holes, and fuel fill access on the Trailering Covers will most likely not line-up. The 275 Shipping cover should fit pretty decent? I have a couple 278 (black) Trailering, and some 275 Shipping covers if interested? XT I am looking for the lightweight cover. Almost like a windbreaker. |
that would be the shipping cover that is about like a windbreaker they just dont last as long as a trailering cover but you can still trailer with it mine is like a plastic / vinyl outside with a soft felt type material on the inside with 2 rachet straps up front for tightening it and 2 buckle straps that go thru the rear eyelets on the boat for the safety straps
|
| All times are GMT -5. The time now is 04:25 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.