Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   26 Outlaw Gelocat Issue (https://www.offshoreonly.com/forums/baja/230990-26-outlaw-gelocat-issue.html)

MDsteve410 05-21-2010 10:22 AM
26 Outlaw Gelocat Issue
 
Hey Guys:

I have a 2008 26 Outlaw with a black hull. When I took the shrink wrap off this spring I noticed a "cloudy / hazy" spot about the size of my hand in the black gelcoat on the port side of the hull. I have wet sanded about as much as I am comfortable with and no improvement. Any ideas or suggestions as I doubt that Sea Ray / Brunswick will be of much help as it is not structural in nature.

Thanks,

Steve

steveh1209 05-21-2010 11:16 AM
id move this to the fiberglass section. Glassdave will know what to do.

Irishtornado 05-21-2010 12:18 PM
Originally Posted by MDsteve410 (Post 3116285)
Hey Guys:

I have a 2008 26 Outlaw with a black hull. When I took the shrink wrap off this spring I noticed a "cloudy / hazy" spot about the size of my hand in the black gelcoat on the port side of the hull. I have wet sanded about as much as I am comfortable with and no improvement. Any ideas or suggestions as I doubt that Sea Ray / Brunswick will be of much help as it is not structural in nature.

Thanks,

Steve
Try Leverage Oxidation Remover on it should take it out.


All times are GMT -5. The time now is 04:11 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.