![]() |
Who owns this boat ??
1 Attachment(s)
Friend is trying to contact the owner.
Does anyone here recognize this pic. Friend looking to buy. Cant find owner. Its in Harrison Michigan Thanks guys Alec |
looks familar, but can't place it...what model boat?
|
Originally Posted by Irishtornado
(Post 3232101)
looks familar, but can't place it...what model boat?
Was advertised, friend called broker, broker cant get owner. |
1 Attachment(s)
2004 Baja 30 Outlaw SST
Fuel Gas/Petrol Hull Material Fiberglass Beam 8' 6" Max Draft 2' 8" Dry Weight 7,800 Horsepower (total) 320 Fuel Tank 120 Length at Waterline 31' 9" Holding Tank 5 Water Tank 5 Engine Hours 320 Max Bridge Clearance NA Cruising Speed 43-MPH Maximum Speed 72-MPH |
that sure looks like a 30OL by the sunpad and dash, but it's 2003 Outlaw graphics on it. I don't know it unfortunately. Looks clean, but with 6.2's it's going to be a slow boat.
|
Originally Posted by Irishtornado
(Post 3232147)
that sure looks like a 30OL by the sunpad and dash, but it's 2003 Outlaw graphics on it. I don't know it unfortunately. Looks clean, but with 6.2's it's going to be a slow boat.
|
Originally Posted by catastrophe
(Post 3232157)
I have a pic of the registration number on the side of the boat. Is there a site I can use to look up a name in Michigan ??
|
First run liner boat...I wouldn't touch it with a 50 foot pole.
|
baja stringers
Originally Posted by Twin-Kyle
(Post 3232308)
First run liner boat...I wouldn't touch it with a 50 foot pole.
|
i think it was in the TBM ,,site before
|
Originally Posted by RACEFUEL
(Post 3232552)
Hey .. If you dont mind ,I have a question.. Did Baja build there boats BEFORE late 2004 with a stringer set up?? I understand that as of LATE 2004 they went to a liner form.. But if they started with stringer,then in late 2004 went to liner,then in 2009 back to stringer is my question..
|
Originally Posted by Twin-Kyle
(Post 3232640)
Yes with the pre 2004 question. When Fountain started building Baja I believe they built just a handful with liners then switched to stringers again. That was in 09.
Do you think you can identify if its LINER by the serial number on the boat?? If its a 2004 I presume you cant know for sure since thats the transition year. |
Now that Liberty owns Baja, Fountain, Donzi & Proline....What if Baja's had liners back in the construction? Proline models have been built with liners for many years w/o any problems.
WHAT IF? XT |
Originally Posted by catastrophe
(Post 3232660)
Kyle
Do you think you can identify if its LINER by the serial number on the boat?? If its a 2004 I presume you cant know for sure since thats the transition year. |
Originally Posted by RACEFUEL
(Post 3232552)
Hey .. If you dont mind ,I have a question.. Did Baja build there boats BEFORE late 2004 with a stringer set up?? I understand that as of LATE 2004 they went to a liner form.. But if they started with stringer,then in late 2004 went to liner,then in 2009 back to stringer is my question..
|
Agree with the graphics setup...I have a 2003 275 Performance and those are 2003 graphics.
|
OK
Thanks, we've come to the conclusion its a Liner boat. Now educate us on the differences and the negative comments regarding a Liner boat. Interesting stuff here. Thanks guys. |
Originally Posted by TWIN-SPINS
(Post 3232562)
i think it was in the TBM ,,site before
|
Originally Posted by tbirdusa
(Post 3233441)
what the heck is that?
|
Originally Posted by tbirdusa
(Post 3233441)
what the heck is that?
|
Originally Posted by catastrophe
(Post 3233466)
Team Baja Marine
|
before long www.BajaBoatOwners.com will have ten times the info and twenty times less drama than that other site when it comes to Baja Boats
|
Forget that part.
My friend found the owner finally, but glad we came on here to ask. Lets get back to the technical question about the LINER negative comments. Any help is appreciated. |
There was liner issues on the 30 Outlaw. I would want to know why it's got 2003 graphics on a 2004
|
It is possible it was ordered that way. I know they did do a couple of boats with different year graphics on them. If i recall there was a 30 Outlaw with the 29 Outlaw graphics on it.
|
5 Attachment(s)
Ok, Here are some photos of the very first 30 Outlaw getting built for the Miami Boat Show in 03'. If you look close in the photos, you can see a simple cabin was done in this boat only to have it done for the show in time. It is the only one ever built with (Foam) stringers throughout. NO 30 ol's were ever built by Baja Marine with wooden stringers. The #2 boat and all the rest had the Baja liner in them. Notice how much higher the nose of the first boat was in the water. It was too light making the boats CG to far aft. It was over 6 months after this first boat until the liner mold was developed, and the model went into production right around the time we started making the 2004 model change in June/July. So this boat in question is a hull that was started early, or more likely a special order paint. Notice the first boat did not have the windscreen developed yet!
As far as liner issues, you can write a book on the pro's & con's. XT |
Originally Posted by XT-Innovator
(Post 3234009)
Ok, Here are some photos of the very first 30 Outlaw getting built for the Miami Boat Show in 03'. If you look close in the photos, you can see a simple cabin was done in this boat only to have it done for the show in time. It is the only one ever built with (Foam) stringers throughout. NO 30 ol's were ever built by Baja Marine with wooden stringers. The #2 boat and all the rest had the Baja liner in them. Notice how much higher the nose of the first boat was in the water. It was too light making the boats CG to far aft. It was over 6 months after this first boat until the liner mold was developed, and the model went into production right around the time we started making the 2004 model change in June/July. So this boat in question is a hull that was started early, or more likely a special order paint. Notice the first boat did not have the windscreen developed yet!
As far as liner issues, you can write a book on the pro's & con's. XT |
liner vs stringer
Originally Posted by XT-Innovator
(Post 3234009)
Ok, Here are some photos of the very first 30 Outlaw getting built for the Miami Boat Show in 03'. If you look close in the photos, you can see a simple cabin was done in this boat only to have it done for the show in time. It is the only one ever built with (Foam) stringers throughout. NO 30 ol's were ever built by Baja Marine with wooden stringers. The #2 boat and all the rest had the Baja liner in them. Notice how much higher the nose of the first boat was in the water. It was too light making the boats CG to far aft. It was over 6 months after this first boat until the liner mold was developed, and the model went into production right around the time we started making the 2004 model change in June/July. So this boat in question is a hull that was started early, or more likely a special order paint. Notice the first boat did not have the windscreen developed yet!
As far as liner issues, you can write a book on the pro's & con's. XT |
Originally Posted by RACEFUEL
(Post 3234138)
I believe boat in question being an /04 was built in March 04 is that good bad or ugly??
It would've been one of the first ones out..Which would explain 03 graphics |
| All times are GMT -5. The time now is 03:48 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.