Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   2002 O/l 25 switch covers?? (https://www.offshoreonly.com/forums/baja/247059-2002-o-l-25-switch-covers.html)

4Lance 02-05-2011 02:07 PM

2002 O/l 25 switch covers??
 
ive been searching like crazy to find black switch cover with the markings on them ive called carling they said good luck just have to find someone that has them b/c you cant buy from them

Just curious if anyone has ever found somewhere to buy them

Irishtornado 02-05-2011 02:24 PM


Originally Posted by 4Lance (Post 3316733)
ive been searching like crazy to find black switch cover with the markings on them ive called carling they said good luck just have to find someone that has them b/c you cant buy from them

Just curious if anyone has ever found somewhere to buy them

Here's where to find them. They have almost everyone you'd need. Hope this helps.

http://greatlakesskipper.com/categor...ch-covers.html

XT-Innovator 02-05-2011 07:02 PM

Carling is very difficult to deal with on this issue. I tried to stock them also, but they want to run 500 at a time per engraved cover. Do the math $5 x 500 x 20-30 different engravings.....ouch! I do have a couple odd ones myself. What do you need?

jfm 02-05-2011 07:46 PM

Not to jump in but what ones do you have?

Nightlife1970 02-06-2011 10:25 PM

I have some as well

SuperTaz 02-07-2011 09:01 AM

I've searched for these 2 or 3 times. Always ended up with 3 or so I coulnt find. Someone already posted it but Great Lakes Skipper has the best supply I ever found. They may have all you need with a single engine. Good Luck.

XT-Innovator 02-07-2011 07:42 PM

1 Attachment(s)

Originally Posted by jfm (Post 3316937)
Not to jump in but what ones do you have?

Just these in the engraved.

US1 Fountain 02-07-2011 08:11 PM

How do you get the covers off? They looked like a 1 shot deal and I didn't want to break the tabs off.

Baja_342 02-07-2011 08:18 PM

1 Attachment(s)
I just replaced all my actuators from the older white ones to the black engraved ones. They make a tool to get them off. I got the tool from digikey.com. Without the tool you MIGHT get one ot two take offs without breaking them. I bought the switch actuators from from greatlakesskipper.com. They didn't have the ACC or HORN ones. I used blank ones for those. You can kind of see them here

Skullkrusher 02-08-2011 02:21 PM

I need a whole set for twins myself. Looks like Great Lakes stocks about half of them. Then I'll have a mix of new and old. There has to be one company out there that has them all. Who is it?


All times are GMT -5. The time now is 05:55 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.