Need help with upper portion for rear seat for 95 272, XT your expertise is needed!
 

OK, I thought the upper portion of my rear bench seat would last another year but i was wrong. I need to repair/replace the wood frame and need some help. Does anyone have pics or specs for the frame. Anything would be a great help! Thanks in advance guys/gals!!!!

Yea, for some reason they seem to be the first thing to rot on a 272 Baja. 1/2" Plastic board is the way to go on anything you replace on the interior over plywood. We could build you one in the plastic, disassemble it for shipping, and you could put it back together and re-trim? We also stock the 1/4" bendable plastic for the curved side arm sections.

ORRR....Just bring the boat to Ohio, and we will fix you right up!

XT

Boy those pieces sure look familiar.... :party-smiley-020:

XT, how much for you to just build me a frame and send it to me? I rebuilt the bottom of the seat last year using your "schooling" but the back looks more challenging to do with the plastic board.

Oh and how the heck do you get the back portion of the seat off? I assume it's bolted to the sides or something?

Yup- reach up through the bottom side pockets and you'll feel two lag bolts per side.

+1

+2

Thanks guys... XT got your PM and I'll get back to you shortly. Waiting to see how much the engine hatch is gonna cost me to fix again.