Go Back  Offshoreonly.com > Owners Forum > Baja
26 Outlaw with 525 >

26 Outlaw with 525

Notices

26 Outlaw with 525

Old 07-08-2011, 07:17 PM
  #1  
Registered
Thread Starter
 
Join Date: May 2011
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
Default 26 Outlaw with 525

I am leaning towards getting a 26 outlaw but I am hoping to get a little more speed out of it than low 60's. I see most of the guys running a 496 HO are topping out at an honest 63-64. Is anyone running a 525 in the 26? If so what speeds are yall seeing? Thanks in advance!
BajaDream07 is offline  
Old 07-11-2011, 08:53 AM
  #2  
Registered
 
noyzee's Avatar
 
Join Date: Jul 2008
Posts: 1,544
Likes: 0
Received 0 Likes on 0 Posts
Default

id have to say a 525 would put you in the high 60's. however the 26 has a strange riser set up that im not 100% sure the cmi's on a 525 would fit on a 26 ol. might, but you may need to dig into that and be sure no cutting is required
noyzee is offline  
Old 07-11-2011, 08:58 AM
  #3  
Registered
 
Join Date: Oct 2006
Location: Michigan
Posts: 1,449
Likes: 0
Received 0 Likes on 0 Posts
Default

525 was a factory option not sure of the speeds, I would guess that with just engine and nothing else you should see low 70's.
Baja_man is offline  
Old 07-11-2011, 09:00 AM
  #4  
Gold Member
Gold Member
 
Dave M's Avatar
 
Join Date: Oct 2000
Location: Hollywood, MD, USA
Posts: 5,652
Received 122 Likes on 77 Posts
Default

My .02, you can get a LOT of boat for what a 26 OL w/525 will cost. I'd shop around a bit. Many boats that size or bigger can run upper 70's, even into the 80's w/525.
Dave M is offline  
Old 07-11-2011, 09:08 AM
  #5  
Registered
Thread Starter
 
Join Date: May 2011
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the input. I will keep shopping around.
BajaDream07 is offline  
Old 07-11-2011, 05:28 PM
  #6  
Registered
 
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Baja_man
525 was a factory option not sure of the speeds, I would guess that with just engine and nothing else you should see low 70's.
I agree with Baja_man. The boat runs 64-66 with a 496HO as the normal number depending on non labbes or labbed props ect, so the math would suggest 71-73 with a 525EFI.

It also came with a 600SCI. I wonder how many of those Baja build.

Buy one and cram an Ilmor 725 in there
A.O. Razor is offline  
Old 07-11-2011, 05:34 PM
  #7  
Registered
 
Join Date: Oct 2006
Location: Michigan
Posts: 1,449
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by A.O. Razor
Buy one and cram an Ilmor 725 in there
Before I did the Raylar I had thought about a Ilmor 625.
Baja_man is offline  
Old 07-11-2011, 06:24 PM
  #8  
Registered
 
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Baja_man
Before I did the Raylar I had thought about a Ilmor 625.
Just curious. What speed and power do you see with the Raylar parts? 103 kit?

A 26ol with a v10 screamin' at 6300-6500 rpm's would be something not seen everyday. Should be run dry to the tips of course
A.O. Razor is offline  
Old 07-11-2011, 07:40 PM
  #9  
Registered
 
Join Date: Oct 2006
Location: Michigan
Posts: 1,449
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by A.O. Razor
Just curious. What speed and power do you see with the Raylar parts? 103 kit?
Still working thru some small issues so speed not accurate at this point. It seems I am only getting a 2/3 throttle (4300-4500 RPM's) but seeing 71-72 GPS.

BCK-106 kit, dyno'd at 660 HP @5400 RPM's
Baja_man is offline  
Old 07-12-2011, 08:56 PM
  #10  
Registered
 
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Baja_man
Still working thru some small issues so speed not accurate at this point. It seems I am only getting a 2/3 throttle (4300-4500 RPM's) but seeing 71-72 GPS.

BCK-106 kit, dyno'd at 660 HP @5400 RPM's
Timing or fuel delivery issue?
A.O. Razor is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.