Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   232 hour meter (https://www.offshoreonly.com/forums/baja/261936-232-hour-meter.html)

zaclesh 09-08-2011 03:14 PM

232 hour meter
 
Looking at buying a 2000 232 islander, where is the hour meter? It's not on the dash. Couldn't find it in the engine compartment. Help???

Hot Tub 09-08-2011 03:20 PM

When we had our 1997 232 Islander, I believe the hour meter was built into the Faria speedo or tach. If it's not there, it may not have one.

Skullkrusher 09-08-2011 04:28 PM

Not every boat has one and even if they do, you should not rely on them too much. There may be one in the engine compartment. If the engine is an EFI, a mechanic's computer can plug in and tell you exact hours and at what rpm's those hours were run.

nhislander 09-08-2011 05:14 PM

i have an 02 islander 232 and its in the bottom of the speedo or tach believe just like an odometer just for hours

XT-Innovator 09-08-2011 05:24 PM


Originally Posted by zaclesh (Post 3498967)
Looking at buying a 2000 232 islander, where is the hour meter? It's not on the dash. Couldn't find it in the engine compartment. Help???

When Baja offered the Faria gauges as standard, and the Gaffrig as optional the Faria had the hour meter in the tach, but the Gaffrig did not. Baja drilled a hole in the engine compartment for the hour meter gauge when the Gaffrig option was ordered. If a ower changed the gauges later on, or maybe Baja forgot to add that gauge?

zaclesh 09-08-2011 06:23 PM

The temp, battery, trim and oil gauge are Faria. The Speedo (gps) and Tach are Livorsi.

Baja_342 09-09-2011 07:14 AM

Sounds like a previous owner swapped out the tach and speedo. Merc scan tool is needed.

XT-Innovator 09-09-2011 08:43 AM


Originally Posted by Baja_302 (Post 3499537)
Sounds like a previous owner swapped out the tach and speedo. Merc scan tool is needed.

BINGO,

No need to keep looking for it!

zaclesh 09-09-2011 06:35 PM

Thanks guys!
If I was to purchase and install an hour meter.....
1. Any suggestions on a brand/model?
2. Will it automatically set to the correct number of hours?
3. What does it hook into?
Thanks!

XT-Innovator 09-10-2011 10:11 AM


Originally Posted by zaclesh (Post 3500033)
Thanks guys!
If I was to purchase and install an hour meter.....
1. Any suggestions on a brand/model? Any model
2. Will it automatically set to the correct number of hours? No, it will start at 0000
3. What does it hook into? Look for a set of loose wires under the deck in the engine compartment. Check if they are hot with the key on.

My answers in Red.


All times are GMT -5. The time now is 11:38 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.