Check out this Hammer
 

That thing has to get HOT!

I seen it at the Cincinnati boat show... Looks better in the picture

All I gotta say is someone smokes way to much crack.

brian

70+ MPH with a 7.4 MPI? Is that right? :confused: I have the same engine in my 232 (only 2 feet longer) and the best (and I mean the BEST) I have seen on GPS is 61.4. Is that two feet really worth 10 MPH?

Sean,

I have a 2001 Hammer with the 7.4 MPI. I don't have tabs on it, and I need a different prop.

I ran 64 GPS this weekend with 3 guys and 3/4tank (45 gallons) of gas.

With a better prop and a lighter load, this boat could hit 70 easily.

Wow!! That's great!!! I had no idea a Hammer could move like that. It must have a higher X-dimension and greater dead-rise than the 232. Enjoy :D

I will vouch for that speed on dloftis's boat. We were wacking the limiters pretty good with this set up. Also the 64 was in 2-4 chop at times, little rough of a ride, but it was a lot of fun!

I honestly think that with a K&N flame arrestor and a new prop, and a few other tweaks this boat could pick up 5-10MPH from where it is! The hammers will move. Also this is one of the most fun power boats I have been on in a long long time!

Oh and IT NEEDS TABS! LOL

I know, I know! ;) K-Planes are going to get ordered.

I think I'm going to do the K&N and the prop first. Little less expensive. I could get some cheapie tabs, but I would rather save my money and get good ones.

There are a ton of hammers out there. GPS them there running about 65(68 on speedo). Get a modified one from a good dealer and you'll get closer to 68(72 on speedo). Still fast for the price.