![]() |
baja 25 outlaw 496 w procharger ???? wheres the stringer?
ok so im about to close this deal on this baja 25 outlaw today. except today i found a problem with the boat that really has my attention now and i cannot find any info by searching that shows pictures or anything. the boat has a 496 ho with a procharger but the stringer is seriously notched
http://i823.photobucket.com/albums/z...t/IMG_1204.jpg is this normal? is it safe ? will the motor torquing wreck anything? any help is greatly appreciated... as soon as i find out whats up here ill be able to decide weather or not to buy the boat. thanks in advance |
That took almost all the stringer out. Looks like the fire wall has been cut too.
I don't know if I would take that chance if it were me. |
I'm not an expert by any means but, WOW.....I've got to think that would effect the structural integrity.
|
i really dont know , the boat has 365 hours on it and i could definetly get it for the right price but this scares me... im not familiar with these boats can it be reinforced?
how does everyone else run a pro charger? |
I would stay away, way to much cut out. Look at where the engine is bolted in and what is holding it. There is a guy on BBO that has one on his 25' Outlaw and he didn't cut all that out.
|
Originally Posted by Steel Outlawed
(Post 3706400)
Looks like the fire wall has been cut too.
|
Run away, don't walk.. Not a good choice to days of happy carefree boating.
|
yeah this sucks
the boat is my father in laws and he has never ever had a problem since the boat was his... thing is he didnt even know the stringer was notched,until i saw it today...(ive done alot of boating with him. thing is i could steal the boat.... it has an XR drive too and 340 hours on it . the boat is an sst with trailer and cover and everything to boot. its obvious it hasnt been a problem but im just wondering does anyone think if the price is right that i should have a brace fabricated ? or have a class guy reinforce? is there a reason why it cannot be fixed ? im all ears right now i know what you guys are saying but im just wondering if it hasnt had any problems why would it ? and whats the going rate for a boat like this ? i could get this boat for less than 19.5k thanks again guys... |
Originally Posted by mattyg1405
(Post 3706461)
yeah this sucks
the boat is my father in laws and he has never ever had a problem since the boat was his... thing is he didnt even know the stringer was notched,until i saw it today...(ive done alot of boating with him. thing is i could steal the boat.... it has an XR drive too and 340 hours on it . the boat is an sst with trailer and cover and everything to boot. its obvious it hasnt been a problem but im just wondering does anyone think if the price is right that i should have a brace fabricated ? or have a class guy reinforce? is there a reason why it cannot be fixed ? im all ears right now i know what you guys are saying but im just wondering if it hasnt had any problems why would it ? and whats the going rate for a boat like this ? i could get this boat for less than 19.5k thanks again guys... |
List of good things:
Its cheap List of bad things: Huge notch in the stringer has a 496 with pro charger has 340+ hours on a 496 with a pro charger You must live in Vegas... You like to gamble! |
| All times are GMT -5. The time now is 04:18 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.