![]() |
Hour Meter/ Tachometer
My hour meter is 78 hours off because the key was left on. :poopoo:
It's starting to bug me, AND I was thinking of selling the boat and want the hour meter to be correct. So is it possible to send the tach/hour meter out to be re-set?? or do I have to buy a new one? It's the stock 8000rpm Gaffrig gauge with a red bezel. 272 Boss package. Any info would be appreciated! :thankyouthankyou: mb. |
Why bother at all...
if you've got an MPI or an EFI powerplant any half way decent tech with a scan tool or PC can get the actual hours. Dump the meters.
|
Originally Posted by Trippin
(Post 3805522)
if you've got an MPI or an EFI powerplant any half way decent tech with a scan tool or PC can get the actual hours.
That's how I know it's 78 hrs off. :whistle: mb. |
I dont think Gaffrig would roll urs back, could be a liability doing that, but Im sure they would sell u a new one with the correct hours on it. :D:D
|
Mine is the same way... about 80 hrs off and when I bought the boat from Shogren (pier57), they gave me the scan data.... so I just remember that it is 80 off..
When you sell the boat they will not trust you (nor would you) and want a scan anyway. save your $$, let it ride, just note down the difference |
I sold my 01 Baja 272 Boss in September and had the same issue. Key was left on and boat had 37 hrs more on the meter than on the engines. Had the engines scanned by a buddy of mine who has a marina with his Merc Scan Tool. Recorded the difference and told the potential buyer i would have this verified if it was a deal breaker or he didnt believe me. Boat had 125 original hrs on it!!!! He trusted me and wasnt an issue. I agree save your money.
|
My port is off too. Same reason. Agree with everyone else, leave it. Although I also agree it's annoying.
|
Try reversing polarity to it with a 12v source .....
|
Just run it in reverse:lolhit:
|
| All times are GMT -5. The time now is 05:26 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.