Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   Baja killers (https://www.offshoreonly.com/forums/baja/290912-baja-killers.html)

POWERPLAY J 03-07-2013 10:47 PM

I plan on weighing mine when she is back together. Weight as tested, Powerboat 1996 6900# dry. Two 100 gal tanks and no water. No head, sink etc. Pretty spartan. She flies nice and carries the bow well but not flighty. As said if you bury the tabs it'll just cut through them. Your welcome for a ride any time. If I don't make it down there your welcome to make a trip up too. Up at midnight drawing paint schemes so I am making an effort to get it done. LOL

Supreboat in 03-07-2013 11:26 PM


Originally Posted by Plowtownmissile (Post 3881703)
Full Force, I agree with you on that. In my eyes, the 3 things that make a boat ride better is more deadrise, more length, and more weight.

I agree with you. This is a very true statement. But if you go light, long, and really skinny you are introducing a whole other angle on how to make for a good handling ruff water boat. Tell me if I'm wrong and why...... If you want to make something cut ...the skinnier the better. If you want to make something fast you make it lighter. If you want to make something land flat you balance it by making it longer to off set the weight in the back. Light, long (for a 7' beam), and skinny you skip from one top to the other. These boats handle the water good for these reasons and are a way different ride than what most are use to. Not saying the best but I am saying that they do handle the waves that alot of people on here say a normal heavy wide 30 (32 if you measure like fountains and alot of other manufactures)would fall apart in. (Not knocking fountain just stating facts. Wanna make that clear before anyone gets their panties all bunched up).

Supreboat in 03-07-2013 11:38 PM

There are pros and cons to both. With a skinny boat like the y2k it is more prone to leaning while underway and rocking form one side to the other. Where in a wide heavy boat this is not as much of a issue. In a heavy boat you are more prone to needing a lot more power/fuel twice or three times as many motors to get to the higher speeds. Wrong?

POWERPLAY J 03-08-2013 12:20 AM

You are correct a skinnier beam will cut better. Good example is any 24x7 hull or a SVL. They will hang with boats bigger with wider beams. That is fact. But there are drawbacks also... Get some seat time in yours. Go run in some 32-35'x8 boats and you will see as the water builds they will stay ahead...

1989mach1 03-08-2013 06:49 AM

if starting from a stand still the y2k would be up and out faster too.

Full Force 03-08-2013 09:44 AM


Originally Posted by Nightlife1970 (Post 3881727)
Well compared to a 33OL, 32 Fountain, 34 Scarab, and an older Formula that I don't know what model but close to the same size. The PP has the smoothest re-entry I have felt. It just seems to land soft. It does not fly like the Fountain, and again it felt softer then a 33OL. The PP and the OL were close in what I call cutting a wave when you put the nose down.

It does feel lighter than the Scarab and the Formula, but it should as it does not have as much free board as those two. But still felt very stable.

That's how my mistress is... It's solid as a rock in big water I don't ever have to say "ouch"

RaggedEdge 03-08-2013 06:29 PM

After 33 pages I could use a fresh cocktail.

WTF is this all about?

Just4FunII 03-08-2013 07:00 PM


Originally Posted by RaggedEdge (Post 3882259)
After 33 pages I could use a fresh cocktail.

WTF is this all about?

LOL! Yep....:popcorn: It's been entertaining.

1989mach1 03-09-2013 01:43 AM

Welll its about boats silly :poopoo: u r on oso lol just playing......i gess some people need to be told that like mt 7&1/2 year old lol

endeavor1 03-09-2013 04:08 AM

Im still trying to figure out what Cig with blower motors he smoked in miami? Im all natural so i guess twins vs the single will be even? Cant wait for the harbor hop after reading this thread!!! :daz:

Supreboat in 03-09-2013 09:06 AM

It was a old 80 something sig the guy had redone and did a very nice job on. It looked like a new boat. He stopped me and talked to me. It had twin supercharged 502s in it. He said it topes out at 70 witch seams about wright. He said him self that it was very heavy. I could be mistaken but I don't believe it even had any steps it it. It was still a really nice boat and was very surprised when he told me what year it was. It look like a new one!

POWERPLAY J 03-09-2013 09:20 AM

Didn't Sig starte putting stips on i.n da 80,s ¿ prob nit a Kivler hall.

endeavor1 03-09-2013 02:27 PM


Originally Posted by POWERPLAY J (Post 3882545)
Didn't Sig starte putting stips on i.n da 80,s ¿ prob nit a Kivler hall.

Omg. :eekdrop::party-smiley-004:

endeavor1 03-09-2013 02:30 PM


Originally Posted by Supreboat in (Post 3882532)
It was a old 80 something sig the guy had redone and did a very nice job on. It looked like a new boat. He stopped me and talked to me. It had twin supercharged 502s in it. He said it topes out at 70 witch seams about wright. He said him self that it was very heavy. I could be mistaken but I don't believe it even had any steps it it. It was still a really nice boat and was very surprised when he told me what year it was. It look like a new one!

Cool. Mine has steps but no superchargers. I ll take the steps:lolhit:

1989mach1 03-09-2013 03:45 PM

i love having the twin step hull. makes my heavy a$$ boat a lot faster.

Keytime 03-09-2013 03:58 PM


Originally Posted by RaggedEdge (Post 3882259)
After 33 pages I could use a fresh cocktail.

WTF is this all about?

T*ts on a bull.

POWERPLAY J 03-09-2013 04:27 PM


Originally Posted by endeavor1 (Post 3882680)
Omg. :eekdrop::party-smiley-004:

That wasn't directed at Supreboat. I was just keeping theme of this thread going. :lolhit:

1989mach1 03-09-2013 04:36 PM

:party-smiley-004:

endeavor1 03-09-2013 08:43 PM


Originally Posted by POWERPLAY J (Post 3882716)
That wasn't directed at Supreboat. I was just keeping theme of this thread going. :lolhit:

Hookt on fonix werkt fer mee:wizard:

endeavor1 03-09-2013 08:45 PM


Originally Posted by Keytime (Post 3882706)
T*ts on a bull.

I'll chat with Harrington tonight. Maybe he can bring that sabre with small blocks out....:poopoo:

Keytime 03-11-2013 11:02 PM


Originally Posted by endeavor1 (Post 3882839)
I'll chat with Harrington tonight. Maybe he can bring that sabre with small blocks out....:poopoo:

Now you're talkin'.

Supreboat is takin' off from the dam and heading upstream at 9am, so catch him somewhere along the way.

Eh, I made that up.

Carry on.

Fenderjack 03-11-2013 11:29 PM

[QUOTE:wizard:[/QUOTE]

Best smiley rite there. hahahaha


John jr

POWERPLAY J 03-12-2013 06:08 AM


Originally Posted by endeavor1 (Post 3882836)
Hookt on fonix werkt fer mee:wizard:

Haha. They should start advertising on this site.

1989mach1 03-14-2013 07:39 PM

keep it at the top lol trash talkers welcome :evilb:

POWERPLAY J 03-14-2013 07:44 PM


Originally Posted by 1989mach1 (Post 3885878)
keep it at the top lol trash talkers welcome :evilb:

I used to have a Baja killer. It was a Sunsation. Oh yeah I also used to own their arch nemesis.... A Checkmate!!!

TW720HVY 03-14-2013 08:43 PM

He is really proud of these videos....

http://www.offshoreonly.com/forums/m...last-fall.html

POWERPLAY J 03-14-2013 09:21 PM

I used to have some bath toy boats that could put a whoopin on the Bajas. The more ya splashed the rougher it got and the Bajas would stay away...

1989mach1 03-15-2013 07:19 AM

love it lol

Keytime 04-08-2013 12:18 PM

Spring Harbor Hop is less than 4 weeks away. :whistle:


All times are GMT -5. The time now is 10:16 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.