Offshoreonly.com - covering up the old clarion head unit holes

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Baja (https://www.offshoreonly.com/forums/baja-31/)

- - covering up the old clarion head unit holes (https://www.offshoreonly.com/forums/baja/302229-covering-up-old-clarion-head-unit-holes.html)

T-RAV

08-30-2013 06:08 PM

Quote:

Originally Posted by firehill19 (Post 3985980)

Travis, this was on my 260 as I got the plate from a friend. Need to upgrade headunit on my 302 and will probably have the same issue as you when its done.
http://i56.photobucket.com/albums/g1...0306091146.jpg

That looks good Keith, I will probably end up going that route, although the acrylic might be a cool idea too.

HOSSMAN

08-31-2013 09:57 AM

2 Attachment(s)

We had the Alpine CDA-118M put in the 29. It has a larger face then a regular head unit however it still wasn't big enough so the guy who did the system wrapped a piece plexi in matching vinyl. I like the aluminum/billet look in the pix above but what we did served the need and it wasn't reflective and didn't get hot.

Irishtornado

08-31-2013 05:56 PM

Alpine doesn't make marine units for the time being. I was looking for one for someone contacted Alpine they said nothing right now.

Baja_342

09-03-2013 07:44 AM

I made a plate out of an acrylic cutting board. Just searched the web for a site that would make them custom widths and sizes.

HOSSMAN

09-03-2013 09:26 PM

Quote:

Originally Posted by Irishtornado (Post 3986668)

Alpine doesn't make marine units for the time being. I was looking for one for someone contacted Alpine they said nothing right now.

As you taught me... Power of EBay...
http://www.ebay.com/itm/ALPINE-CDA-1...item1e736e747a

All times are GMT -5. The time now is 03:55 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page