24 outlaw Prop & speed question
 

I just picked up a 1995 24 outlaw & I'm have a motor built for it 454 with about 550hp what would u guys start with for a prop my engine builder said I can rev it to 5500rpm also what might I see speed wise I'll post pics soon

Thanks Jay

with 1.5 ratio drive, 24-26 4 blade or 25 3 blade, high 60's to low 70's depending on setup

I agree with above...good place to start. If your mill actually makes that kinda HP then you should run well into the 70's. The Mirage Plus 25 is a BEAST stock, but if you can turn it the proper "Baja" lab recipe will put you out front of the pack in a 24' w 550 HP.

I know where one is that already has the proper work done (Bblades) with zero hours that MAYBE for sale if you're interested.

I have a 24 outlaw with about 520hp. I spin a 24 bravo 1 to 5300 at 70.4mph, and a 26p bravo 1 to 4900-4950 at 71.2mph. So far thats what I have seen.

I have a 24 outlaw with about 520hp. I spin a 24 bravo 1 to 5300 at 70.4mph, and a 26p bravo 1 to 4900-4950 at 71.2mph. So far thats what I have seen. I think a labbed 26 is probably the ticket. The 24p you will probably hit 5500, or a touch better, a 26 about 5100-5150 probably, but if you lab the 26 you should see 5300-5450. I bought a 24 and 26, and plan to lab the 26 to get it up to around 5200

Thanks guys I'm putting the motor in this up coming week & hope to water test next weekend I'll let you know how I make out

Yea keep us updated, looks like my 24 is sold so I am going to send my 26 to bblades to get labbed in the next week or so

Has anyone put a -2 shorty on a 24 outlaw befor & if so dose it work good

Have one on mine it works great but I also have a few other mods.

[IMG]http://i1266.photobucket.com/albums/...psc89ffe2b.jpg[/IMG]

What do u have for HP & what's the best u have seen speed wise

705 hp 89 mph

What prop are you using and RPM are you getting?

32 labbed maximus, 5350 or so

I would love to see some pics of the boat if u don't mind posting some pics

[IMG]http://i1266.photobucket.com/albums/...ps23e47fa7.jpg[/IMG]

[IMG]http://i1266.photobucket.com/albums/...psf85b695a.jpg[/IMG]

Any pics of the engine

[IMG]http://i1266.photobucket.com/albums/...psda5b44e8.jpg[/IMG]

That is a nice lookin set up thanks for posting pics

nice setup!