factory table
 

guys.. I notice my boat has the mount in the floor for a factory pole and table but its NOT on the boat.. where should I be searching to try and track one down.. OR is there any new non-factory that will work with our boats..

thanks guys,
Mike

You can get them at pretty much any marine store. They are pretty universal.

oh OK.. I didn't know, thanks for the info :)

I have a spare one and the poll out of a Baja. Mine is the recess pocket style. Picked it up for the just in case some day might need it...

But there only like 60-100 new so it probably isn't worth shipping to MD. just google "boat round white table". But If you have to have it and OEM Baja send me a text ill take a couple photos of it. 320 828 3483 Rob

so any marine pole with work with our factory mount on the floor ?

As long as it's the same diameter, I would think they are universal. My situation is a lil different, I have the pole and table and not freakin mount in floor?? Wth

I have a flat style mount hole.. the one 92NSX has wont work..

Can you please post a pic of the bottom side of the table? I have the pole but no table top. Thanks!

It is dirty from sitting in the shed but here are some photos. From my research Baja use 3 different mounts. The flush style that Nordy has on the newer boats, and 2 recessed pocket ones. One locks and one just slides in. I have the slid in one on my 2000 33 OL.

This is my spare one I can part with is some one wants OEM. Slide and lock style. Also works on my slide in. You can see the small black tab that locks it in place

http://i212.photobucket.com/albums/c...psufyxkqqn.jpg

http://i212.photobucket.com/albums/c...ps5zu8dxcy.jpg

http://i212.photobucket.com/albums/c...ps4o6rg85j.jpg

Sorry this one has tire shine on it from sitting on the spare tire. Needs cleaning

http://i212.photobucket.com/albums/c...psfn0lwrxz.jpg

http://i212.photobucket.com/albums/c...pswqmhvslx.jpg

Thank you kindly, I have the floor mount & post but no table.

I bought new tables off of Amazon that came with better flush mount floor pockets and pole as well. Complete kit for about $70.

link on ebay?

^^^^ Close but not OEM :p

Does that fit the OE table post and base? If you didn't try can you get me an OD on the post pleasE? I actually like my OE sunken base and just had it powder coated.

The actual baja table is 3/8" thick smoked lexan. The cup holders are cut out and there is a baja logo in the center. I have one.....I'll try to remember to take a pic for you

please do that would be cool to see

This is the top. I have to pull the post out. I'll get a pic of that too.

This is my base I need to find a table to work with.

http://i41.photobucket.com/albums/e2...pscbdxvi5l.jpg

Actually no. The new table leg wobbled in the OEM base so I used the plastic one they provided.