Propeller Repair Insurance
 

yes, prop repair insurance? We are now offering unlimited repairs for one year, on your props. You will be sent a repair certificate, effective the date of first repair, we will do what you want to your prop under the repair policy, which covers welding,satinfinish,cupping, and shipping back. The policy covers repairs and custom modifactions, UNLIMITED for one year,it does not include hub inserts, the cost is 269.00 If, the prop is not repairable, the policy will carry on to your spare prop under the discretion of Houston Propeller, just call and purchase your prop repair insurance policy today.:) ask for Darin;)

Darin,

Did you get my props ok?

NOT HERE YET ?
 

Check your ups tracking # and see where they are , but I am sure they will be here Monday if you sent them out last friday/Darin

Why not get out to more people by posting in the General Discussion Group?

thank's
 

thankyou for the idea,all good things take time.

Huston Prop, How much to lab a turbo stainless 3 blade 16x19? How many more rpm could I look for? How many more mph?

Thanks
Tommy

2 Props
 

Well just pulled the 25 Mirage Plus's off the "new" 302 and they are rough. looks like they found some crab traps in the Chesapeake before I hauled to boat to Jersey. They seem to be set really well at their stock config so I don't know how much work will be required. I would like them labbed and balanced though - general cleanup. I have expereince with Bronson Hill but you guys seem to show a pref. for Baja's. What was the deal you are offering tight now? Also, what more performance can I get if I really don't want to change the prop too much. The boat will porpoise once in a while, but nothing some quick work on the trim can'f fix. I'll blow out on the holeshot with heavy throttles, but that's to be expected. I think 4-blades will kill too much speed for my preference. I have seen 77mph, guy I bought it from say he saw 80 on the GPS.

Whadduyothink?

16" dia ?
 

Tommy the price is 150.00 if the prop needs repaired with some welding add 99.50 or you could go with PROP INSURANCE AND THIS WILL COVER IT ALL FOR A YEAR NO MATTER WHAT. The price is 299.00 for unlimited repairs. but check the diamenter as I think it's not really a 16" as far as rpm it will usually come up 200 with a cuple of mph

Re: 2 Props/SHOOTER
 

THANK YOU ! The props I can visualize by your description,not really bent but the edge's are very rough and thick,lot's of mar's or deep scratches on blade area and dull looking well we can make the look better than new and perform better than new and stop the blowout on planing, labbing the props will pick up a couple of mph maybe four on this setup.several way's to go for pricing, unlimited repairs one year each prop 299.00 or 150.00 each prop. it's up to you I would go with the unlimited repair policy as our normal fee is 225.00

yeah, you called it. I'll ship them to you in a week or so, I'm heaing to diz-ne with the family next week. One qurdtion, are you saying that just labbing will remove blowout? I though you had to work the cup to get that effect. I'm just under the rev limiters now by about 100rpm or so. I have twin 502 MPI Mags.

Thanx

Re: 16" dia ?
 

I am running 5200 now, need to be in 4400-4800 rpm range so I will wait till i get a bigger prop, is there a 20? What diameter should i run.... Ill check the dia on it now on saturday, the boat fuzz says if it isnt out, its impunded...

Shooter ,thank's have fun at Disney, sounds like fun haven't been there in 18 years, anyway when you are ready re-fresh me with a e- mail and ,I will call you . again thank's Darin

HYPERBAJA ,NO PROBLEM WE CAN WORK THE PROP YOU HAVE AND PULL THE RPM DOWN TO 4,800 AS FAR AS THE DIA" MEASURE FROM THE CENTER OF THE HUB TO THE TIP OF THE BLADE AND DOUBLE IT, IAM GUESSING IT'S A 14X19 PITCH OR 141/2X19 BUT WE CAN CHANGE THE PITCH AND DIA IF WE NEED TO .LET ME KNOW

It will be out of the water on saturday. Ill drop you an email then.

thankyou!
 

no problem, we will be waiting, again thankyou very much.

night off
 

catching up/