Vent the hatch while beached, heat soak, cool fuel could of been the issue

I'll remember that for next time. Thanks

What’s the latest with your ride. How’s it been going? Been out any?

I can get it started if I got the throttle at 100% and crank the engine it will fire up kind of hard though. So what I did last week was swap out the IAC because I took the orginal one out and replaced it with an autoparts one, but the issue then was the fuel pump. So, my theory is maybe I swapped out a good part for a faulty one. I did that last Tuesday and took it out for a ride, stopped and floated for about an hour and it started back up just fine. Did that twice with no issues. Hopefully that was it, guess we'll see in time.

Also, the carbon monoxide alarm randomly went off while cruising. Alarmed for about 4 minutes then silenced. Any ideas? Haven't got a chance to look into it, but I couldn't imagine there would be any carbon monoxide in the cabin while moving...?

Incoming updates with pictures:

https://cimg1.ibsrv.net/gimg/www.off...780686d53.jpeg
Got the prop cleaned up, this took care of my planing issue and I’m seeing about 63 MPH.
https://cimg2.ibsrv.net/gimg/www.off...51b5fb0e2.jpeg
https://cimg3.ibsrv.net/gimg/www.off...3c5e871d9.jpeg
Replaced old clarion head unit to the m508 for better Bluetooth connection. This started a stereo replacement project.
https://cimg5.ibsrv.net/gimg/www.off...43b89dbd6.jpeg
Re-wired the whole stereo and added a cheap monoblock amp. Previous owner had the system severely under powered. Kept clipping. This was fall of 2021.
https://cimg8.ibsrv.net/gimg/www.off...355dd3c8d.jpeg
Current speakers.
https://cimg0.ibsrv.net/gimg/www.off...a659dab00.jpeg
Current subs.
https://cimg3.ibsrv.net/gimg/www.off...89dfac8d5.jpeg
Finished wiring.
https://cimg0.ibsrv.net/gimg/www.off...504399451.jpeg
Got a 2 new M6 10” subs and an amp just last week. Going in soon.
https://cimg5.ibsrv.net/gimg/www.off...04f8476ac.jpeg
10” M6 with LED Looking for (6) M6 770 speakers now.
https://cimg5.ibsrv.net/gimg/www.off...44b04ccc5.jpeg
Ordered some marine mat for just the foot steps and above the cabin door. Don’t want to commit to the whole cock pit floor just yet.

https://cimg6.ibsrv.net/gimg/www.off...d91d962e0.jpeg
https://cimg2.ibsrv.net/gimg/www.off...aa763adc3.jpeg
Marinemat
https://cimg2.ibsrv.net/gimg/www.off...a0e2b23ce.jpeg
Pair of 880, 770s, and 650 M6s and 2 10” subs
https://cimg6.ibsrv.net/gimg/www.off...a10d887fb.jpeg
M6 880 vs the mx 770
https://cimg0.ibsrv.net/gimg/www.off...316a85cfe.jpeg
770 vs 880
https://cimg7.ibsrv.net/gimg/www.off...4aa024fdd.jpeg
Just enough depth.
https://cimg8.ibsrv.net/gimg/www.off...b2b9efcf9.jpeg
880 and factory 650 placement.

Awesome looking boat! Can you lead me in the right direction on where you actually purchased your marine mat with any details that would help me out to place an order. Appreciate any help you can provide.

Thanks,
Will

I went through https://www.marinemat.net/ I used another individuals order # for his 25 Outlaw, and just picked the pieces I wanted. You can reference my order # 92046. If you'd like I can forward my email conversation with them to you, just send me your e-mail address.