Coming Soon
 

Houston Propeller has aquired the domain name Bajapropellers.com and we will be setting up our own little site,I will continue to work with Blake and will also be here on offshoreonly but ,I love the name and will let you know when its up and running.:cool:

Pretty COOL!!!!!!!!!!!!!!!!!:D :p ;) :cool: :eureka:

SWEEEEEEEET ;)

I will spread the word around here....

Tommy

Darrin, are you limiting your services to baja customers for any particular reason? I am still waiting to see how doc holidays props worked out for him as I plan on doing some b1's 28p this spring.:drool: :drool: :cool: :cool:

YEP!
 

And , I hear its pretty cool in North Carolina.Thank's DOCK:eek: It is pretty darn cold here too.:mad: Darin

darin:


that web site sounds awsome!!!

i will be ready to send my prop to you in feb.

i sent you am e-mail a few months ago.

here is my bio:

29 outlaw 502 mag mpi. bravo I

21 pitch 3 blade mirage

wot: 4900 rpm's 57 mph gps.

i am going to install a k&n air cleaner in the next 2 weeks.

should i go out and re-check readings prior to prop work??

i also will need some clean up work, there are nicks on all

3 blades.

jc:D :D :D

Hey JC - If you don't mind, let me know how your props turn out when you get them back from Darin. I was thinking about sending him mine just to get cleaned up. I am real interested to find out your results since we have the same boat (single 29 outlaw w/ 502 mag). Thanks - Eric

maybe
 

maybe Doc will post a picture of the leading and trailing edges of his props and then look at yours? the rpm will come up and I hope the speed does as well. I should have put the satin finish on them like Mercury does ,but they dont look near as nice,we are not limited on repairs, as we do all types of props up to 36" in dia.It is the Mercury Mirage prop that I can get the most out of and you know how many Baja's have this prop on them.:D if the edges are razor sharp and slighty rounded its the best but they sure dont last very long.Doc's props are not, but they are alot thinner than stock.Darin

lab now or later
 

it does not matter I am pretty sure what to do to get you some additional performance out of the stock Mirage prop you have and if I dont just send it back and no -charge to you we will do it again ,but you won't need to.;) Darin

Darin,
That's great. Let us know the progress. I'm looking forward to it. :)

hey darin your p.m. box is full :eek: :eek:

Thanks everyone!!!!!! / BajaPropellers.com/coming soon!

29 outlaw
 

eric:


what kind of speeds and what mods have you done on your

29 outlaw... there is another guy on this site that has the same

boat and we have compared notes also...

jc;) ;)

houston prop
 

darin:


i will drop you a line in late february when i send my prop.....

and you can call me to discuss.. or we can do it on line!!

jc

Just to be sure.. Are you talking Mirage or Mirage Plus? Giant difference you know!!

mirage vs. mirage plus
 

what is the difference between mirage vs. mirage plus??


jc

mirage plus /mirage
 

JC basically the main difference is blade thickness/the plus is alot thicker than the old mirage the plus also has the vent hole already pre casted with removable plugs the two props fit on the same pitching mold. the rake and pitch is the same.;) also you will find the mirage plus has a much nicer finish compared to the older ones some were polished and the old quicksilver mirage is also the same but was always a rough satin finish when they first came out.they also rusted alot if the prop had been in salt water.:mad: :D hope I have helped out JC. /Darin

I think too the mirage plus comes with cupping and the mirage does not.

CUPPING ?
 

HELLO!!!!! Jason no both props and most all props now days have cupping.;) UNLESS IT IS A FULLY SUBMERGED PROP such as a tug boat or something like that I am doing a pair of brass 28x30 pitch that have no cupping.:fish: Darin

can't wait to check it out!!! i saw what you did with a buddy of mine's prop (H2XBJS on TBM). world of difference. i will be sending you my prop soon.

Thankyou! Redraider/H2xBJS
 

Thank's t both of you!Darin:D :cool: