? for Outlaw owners
 

The last bolt on my bow rail closest to the front of the boat is different from the rest on the rail. It is a stainless (silver in color) phillips head while the rest are white Allen head bolts. To me it looks stupid and out of place. Is anyone elses like this?:crazy:

Mine are all the allen head kind.

mine is the same as yours, bought mine used so i thought that it was a replacement, but i guess not.

1999 36 outlaw

always bugged me

scott

Mine is like you describe. The one on the end is screwed directly into the deck. The others (allen head) are screwed into the small white cylinders between the rail and the deck.

Same here, bugs the hell out of me.

I do not have a clue whay they do that.

2002, 36 Outlaw

I think it's because the one on the end that screws into the deck needs to be a self-tapping deal vs. the allen head ones that screw into a pre-tapped cylinder. Which part bugs you guys? The fact that the screw head is not white or the fact that the screw head is phillips vs. allen.

So, you guys are saying that all are allen except for the bow-most one? :confused: :confused:

I could swear mine are all allen. I used an allen wrench to get the wax out of mine and I didn't notice any phillips.

YES:D

I will have to look, dont know!!!!!!!!

It is not only silver but does not sit flush with the rail like the other ones. To us picky or dare I say anal people, things like this don't go unnoticed. I wrote to Baja to complain and they said they would pass it on to engineering department.

I also complained about those useless hatch screens! Why not use velcro or some better method to install them so they seal up the opening some. On cool nights when we want to stay on the boat with the bow hatchs open we end up with a cuddy full of insects.