When are the new 28' and 35' scheduled for production?
#1
Registered
Thread Starter
When are the new 28' and 35' scheduled for production?
I'm hoping to order a new hull this summer. Will the new 28 or 35 be coming out any time soon?
(Is the new 24' ready yet?)
I'll be interested in one of these hulls if the timing coincides and all the other variables work out.
I may cave in for a cat next, we shall see
Thanks
Evan
(Is the new 24' ready yet?)
I'll be interested in one of these hulls if the timing coincides and all the other variables work out.
I may cave in for a cat next, we shall see
Thanks
Evan
#2
Registered
Re: When are the new 28' and 35' scheduled for production?
24's should be rolling off the line within 60 days.
the 35 is scheduled next - probably the fall sometime - then the 28.
the 35 is scheduled next - probably the fall sometime - then the 28.
#3
Registered
Join Date: Jan 2004
Location: carolina shores
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
Re: When are the new 28' and 35' scheduled for production?
Originally Posted by Chatim Racing
24's should be rolling off the line within 60 days.
the 35 is scheduled next - probably the fall sometime - then the 28.
the 35 is scheduled next - probably the fall sometime - then the 28.
#5
Registered
Thread Starter
Re: When are the new 28' and 35' scheduled for production?
Damn those are both sweet pics, I assume the 35 will have a rear bench seat and not the full stagger, (too bad you cant have both in a 35.)
#6
JC Performance Engines
Gold Member
Re: When are the new 28' and 35' scheduled for production?
Originally Posted by Dregsz
Damn those are both sweet pics, I assume the 35 will have a rear bench seat and not the full stagger, (too bad you cant have both in a 35.)
A sixpack bolster would be nice too!
You guys will be fully custom, right?
#7
Registered
Re: When are the new 28' and 35' scheduled for production?
Yes, we are custom, but the 35 with the race deck...or poker run deck will be built just like it was in the old days....no additional bolster in the rear. That setup had perfect balance, so we are not going to try to be smart guys and reinvent something that doesn't need it.
A second but different deck, will have more seating room and will be made in side by side engine configuration.
A second but different deck, will have more seating room and will be made in side by side engine configuration.
#8
JC Performance Engines
Gold Member
Re: When are the new 28' and 35' scheduled for production?
Right...
What i meant was will you also build a sixpack inleiu of a rear bench.
sorry for any confusion.
A staggered 3man would be insane.
What i meant was will you also build a sixpack inleiu of a rear bench.
sorry for any confusion.
A staggered 3man would be insane.
#9
Registered
Thread Starter
Re: When are the new 28' and 35' scheduled for production?
Could the cockpit move forward far enough to accomodate a rear bench and full stagger, without being too far forward? and ruining the proportion and balance?
The bench could be flip up to access the front of the motors or some such thing
Is it possible to have it all in a 35' boat?
The bench could be flip up to access the front of the motors or some such thing
Is it possible to have it all in a 35' boat?
Last edited by Dregsz; 02-03-2006 at 12:44 PM.
#10
Registered
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: When are the new 28' and 35' scheduled for production?
Yes, we are custom, but the 35 with the race deck...or poker run deck will be built just like it was in the old days....no additional bolster in the rear. That setup had perfect balance, so we are not going to try to be smart guys and reinvent something that doesn't need it.