Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Banana Boat (https://www.offshoreonly.com/forums/banana-boat-150/)
-   -   Getting ready to restore (https://www.offshoreonly.com/forums/banana-boat/347578-getting-ready-restore.html)

Joshm 06-12-2017 12:37 PM

Getting ready to restore
 
just started restoring hull #19 and curious what speed I can expect out of a 5.7 with between 260 and 300 hp. I'm converting from a trs to a bravo drive. The boat will be fairly light as it will have no cabin interior just bare stringers. I'm also wondering if anyone has the ideal x dimension for this setup. Thanks guys.

Joshm 06-12-2017 04:16 PM

The other question I have is cutting the cockpit floor out for fuel tank access anyone know if it's bonded to the stringers or not?

tuffenuff355 06-21-2017 08:34 PM

Fuel tank is foamed in place.

Joshm 06-21-2017 09:56 PM

Thanks for that cutting decks tomorrow. ����

sp123 06-22-2017 03:16 PM

Don't forget to document the build... would love to see photos of your progress.....

KevD815 07-18-2017 04:01 PM

Floor is not bonded to the stringers and if you haven't cut it yet, its easiest to cut around the perimeter of the floor. There is a thread about fuel tank replacement somewhere in this forum. A small block with 300ish hp and a bravo will get you around 60 mph I would imagine. I have hull #23 with a TRS and a 454 truck engine that runs about that.

sp123 11-30-2022 02:41 PM

https://cimg7.ibsrv.net/gimg/www.off...0f12a62215.png
https://cimg8.ibsrv.net/gimg/www.off...468560bf4a.jpg
https://cimg9.ibsrv.net/gimg/www.off...f401c0d7fd.jpg
https://cimg1.ibsrv.net/gimg/www.off...eaa33476f5.jpg
https://cimg3.ibsrv.net/gimg/www.off...25d6d1275b.jpg
https://cimg5.ibsrv.net/gimg/www.off...c9f1c113d5.jpg
https://cimg0.ibsrv.net/gimg/www.off...049dd3468c.jpg
https://cimg5.ibsrv.net/gimg/www.off...bbdce0c7d.jpeg
https://cimg9.ibsrv.net/gimg/www.off...bd39bd55d2.jpg
https://cimg7.ibsrv.net/gimg/www.off...58bc500ef2.jpg
https://cimg9.ibsrv.net/gimg/www.off...7aa26e30f.jpeg
https://cimg1.ibsrv.net/gimg/www.off...e07e93d04.jpeg
https://cimg6.ibsrv.net/gimg/www.off...67b1a5299.jpeg
https://cimg7.ibsrv.net/gimg/www.off...9729274fa.jpeg

sp123 11-30-2022 02:43 PM

https://cimg7.ibsrv.net/gimg/www.off...f074b1b365.jpg

sp123 11-30-2022 02:44 PM

This is a 1987 finally done. will be in the water next spring in RI

sp123 11-30-2022 02:47 PM

https://cimg4.ibsrv.net/gimg/www.off...eae8e495f.jpeg
https://cimg7.ibsrv.net/gimg/www.off...f9025fda6.jpeg

sp123 11-30-2022 03:01 PM

https://cimg5.ibsrv.net/gimg/www.off...d79c9040c.jpeg
https://cimg8.ibsrv.net/gimg/www.off...cf0df9c5f3.jpg
https://cimg5.ibsrv.net/gimg/www.off...cd2bda7831.jpg

Stuckonstupid 11-30-2022 03:40 PM

Very nice, what are you doing for power?

scippy 11-30-2022 05:16 PM

sp123 did you buy this boat from thread starter Joshm?...........wonderful transformation & having photo opt with Banana boat builder/racer Charley McCarthy cherry on top!

sp123 12-01-2022 08:24 AM

No ... I bought this boat from another party but I wanted to share photos... Charlie was very helpful in this build. It will have a single 300R on the back as I realize I will not be able to keep up with all the boats one market today but I just want the grandkids to have a fun boat that is economical to run. Another issue I ran into in getting a motor is that there is no max hp tag on the boat. no dealer would even quote me a price as they claimed insurance regulations would not allow them. Also I was told a 400 was approx. 3-4 year wait and I waited long enough for this. my first builder had the boat for 5 years and not much was done but two checks were cashed.....

larslindroth 12-28-2022 11:31 PM

Impressive perseverance and the photo with Charlie tell it all. I bet the grandkids will be very excited about this ride and hopefully, in 50 years one of them will pass it on. Love the colors, but then I'm partial.

https://cimg4.ibsrv.net/gimg/www.off...e3ba89f7ba.jpg

sp123 08-10-2023 02:51 PM

https://cimg2.ibsrv.net/gimg/www.off...dc425eed39.jpg

sp123 08-10-2023 02:52 PM

photo above is from the Borden Light Marina Poker Run last Saturday.

rageman28 12-26-2023 05:13 PM

We have a 1985 24' Hull available: https://ragepowerboats.com/product/1985-24-brt/


All times are GMT -5. The time now is 03:50 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.