Break In at Flint's in Ft. Lauderdale
I lost my gimbal housings off my 255 Formula with RAMs.
Be on the look out for anyone trying to move 2008 or later very fresh Bravo Transom Assemblies in SE Florida. This is just one more kick in the gut for me!!! |
I'm so sorry to hear John. Especially with the fiasco with the last one.
|
That's just f u c k e d.:poopoo: What a kick in the balls. I'm dying to see your boat running. I've been following your threads from the beginning.
Maybe somebody here has a pair of assemblies they can help you out with. |
Billy called me this AM and told me. My 255 Formula was in the yard with the Transom assemblies installed. He went this AM to pull mine into the shop to set the engines and drives and discovered that the lock on the gate had been cut and my Transom Assemblies were gone!!! Called Ft. Lauderdale PD...spoke with Jason at Brand X , Tommy at Chief and the guys at Cobra.
Be on the lookout for a pair of 08 Bravo Transom Assemblies Complete with Rams, Hoses, Cables, etc.....very fresh...less than 50 fresh water hours. This is a real kick in the gut for me and really sets me back. [IMG]http://i705.photobucket.com/albums/w...9/transom2.jpg[/IMG] [IMG]http://i705.photobucket.com/albums/w...9/transom1.jpg[/IMG] [IMG]http://i705.photobucket.com/albums/w...9/DSC_0646.jpg[/IMG] http://i705.photobucket.com/albums/w...9/DSC_0645.jpg My wife has Multiple Sclerosis and using this boat is one of the things we have been looking forward to since I started this project...It broke my heart to tell her that we have yet another set back to overcome after getting so close to getting in the water again. Somebody in South Florida that reads this knows something...please share what you know...you will be isolated from being accused...I just want my $hit back!!! They didn't get the inner plates or the pumps...must have been in a hurry...things like my Smith Mod 29 .44 Magnum come into my mind very quickly if i could get a shot off!!! If anyone even gets a sniff of these things call John at 561-707-5150 |
fixx
Originally Posted by sprink58
(Post 3888574)
Billy called me this AM and told me. My 255 Formula was in the yard with the Transom assemblies installed. He went this AM to pull mine into the shop to set the engines and drives and discovered that the lock on the gate had been cut and my Transom Assemblies were gone!!! Called Ft. Lauderdale PD...spoke with Jason at Brand X , Tommy at Chief and the guys at Cobra.
Be on the lookout for a pair of 08 Bravo Transom Assemblies Complete with Rams, Hoses, Cables, etc.....very fresh...less than 50 fresh water hours. This is a real kick in the gut for me and really sets me back. [IMG]http://i705.photobucket.com/albums/w...9/transom2.jpg[/IMG] [IMG]http://i705.photobucket.com/albums/w...9/transom1.jpg[/IMG] [IMG]http://i705.photobucket.com/albums/w...9/DSC_0646.jpg[/IMG] http://i705.photobucket.com/albums/w...9/DSC_0645.jpg My wife has Multiple Sclerosis and using this boat is one of the things we have been looking forward to since I started this project...It broke my heart to tell her that we have yet another set back to overcome after getting so close to getting in the water again. Somebody in South Florida that reads this knows something...please share what you know...you will be isolated from being accused...I just want my $hit back!!! They didn't get the inner plates or the pumps...must have been in a hurry...things like my Smith Mod 29 .44 Magnum come into my mind very quickly if i could get a shot off!!! If anyone even gets a sniff of these things call John at 561-707-5150 |
Got a video....:evilb::evilb:stay tuned....I can't touch you now...but two things are sure as Hell. Your Dirty...and I'm patient.:cool:
|
Hopefully the video unveils something! Throw the book at those phuckers! :violent-smiley-045:
|
We think we know who got them and they went on a Cigarette Top Gun that's now somewhere in Miami. Sort of like finding a particular grain of sand at the beach!!!
I think I have a better chance of seeing Jesus drive up with my new Ferrari than getting them back....time to move on and build around another pair. Take a lesson from this...don't let your guard down...security is a state of mind. There is always some turd out there greedy enough to take your treasure from you...don't give them the opportunity ...because they will take it. |
yes 5200 the next ones on, sorry for your loss.
|
just goes to show ya, there's a DOUCHEBAG in every town who just don't give a phuk about anything or anyone!!! SHOOT FIRST!! then ask the questions!!
|
Originally Posted by adk61
(Post 3893637)
just goes to show ya, there's a DOUCHEBAG in every town who just don't give a phuk about anything or anyone!!! SHOOT FIRST!! then ask the questions!!
[IMG]http://i705.photobucket.com/albums/w...ps34b2b127.jpg[/IMG] [IMG]http://i705.photobucket.com/albums/w...psbea711b3.jpg[/IMG] ...next time.... |
fixx
hey john,think they will let me on the plane with mine lol..
http://i35.photobucket.com/albums/d1...ps8d8f1a38.jpg |
if your police are like ours good luck, we had a truck stolen called the cops, they came up never got out of his car, i asked him if he wanted me to show him where they drove thru the fence he said nope, im just here to make a report!!!! never got out of his car. our tax dollars at work.
|
Originally Posted by FIXX
(Post 3893918)
hey john,think they will let me on the plane with mine lol..
http://i35.photobucket.com/albums/d1...ps8d8f1a38.jpg |
An N Frame is always a good response to the scumbags:
http://i146.photobucket.com/albums/r...1/DSCI0001.jpg |
Originally Posted by glenncal1
(Post 3894951)
An N Frame is always a good response to the scumbags:
http://i146.photobucket.com/albums/r...1/DSCI0001.jpg |
sure, its long enough to be considered a rifle and not a hand gun. :boat:
|
Originally Posted by sprink58
(Post 3888574)
Billy called me this AM and told me. My 255 Formula was in the yard with the Transom assemblies installed. He went this AM to pull mine into the shop to set the engines and drives and discovered that the lock on the gate had been cut and my Transom Assemblies were gone!!! Called Ft. Lauderdale PD...spoke with Jason at Brand X , Tommy at Chief and the guys at Cobra.
Be on the lookout for a pair of 08 Bravo Transom Assemblies Complete with Rams, Hoses, Cables, etc.....very fresh...less than 50 fresh water hours. This is a real kick in the gut for me and really sets me back. |
OK...DAMN what hell the past few weeks have been.
Anyway...getting with Diego tomorrow to get T/A's and a Bravo I. Oil Coolers are on the motors. i have worked out an arrangement with Billy Flint that finishes everything up...he is a serious stand up guy...and is as sick over this whole pile of $hit as I am. The plan is for all of this to come together next week Stay tuned....happy times are on the way!! |
Man that sucks! Hope you get it in the water soon! Who knew we needed locks on the transome assemblies as well!!!
|
Originally Posted by the deep
(Post 3895138)
Is that still legal in CO. ? :eekdrop:
|
I don't have a pic of my 44.40 but love it.
|
There is a guy on the Facebook\Powerboat Swap Shop page with a set of Gimbles for sale... I don't know the guy, and Probably not yours, but figured it was worth bringing attention to...
https://www.facebook.com/home.php#!/...1777369989888/ |
Originally Posted by low_psi
(Post 3906731)
There is a guy on the Facebook\Powerboat Swap Shop page with a set of Gimbles for sale... I don't know the guy, and Probably not yours, but figured it was worth bringing attention to...
https://www.facebook.com/home.php#!/...1777369989888/ |
That guy seems to be listing a lot of Hi-Po marine stuff. By no means calling the guy a theif, but worth bringing it up.....
|
Originally Posted by low_psi
(Post 3907167)
That guy seems to be listing a lot of Hi-Po marine stuff. By no means calling the guy a theif, but worth bringing it up.....
|
Was just stating the facts. Never called anyone anything.. Just stated he had a lot of high dollars stuff showing up on Facebook.... It even says in my last post "By no means calling the guy a theif".
|
The fellow on Facebook is in NC and not connected to my issue at all.
|
It was worth checking out. I read this thread and shortly there after saw the two assemblies on FB . Figured it was worth a look....
|
All times are GMT -5. The time now is 01:27 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.