Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Beware and Stolen (https://www.offshoreonly.com/forums/beware-stolen-183/)
-   -   Anyone in the Hillsboro Ohio area? (https://www.offshoreonly.com/forums/beware-stolen/304488-anyone-hillsboro-ohio-area.html)

Griff 11-13-2013 02:42 PM


Originally Posted by the deep (Post 4026331)
To protect and serve notice ? Maybe a PM would have been the better move here . This guy is just more emboldened now as it appears his actions WILL be tolerated . This needs to be set straight Griff . Yes maybe you needed to do a little reining in but .............Don't ban me for speaking my mind on this .

I guess you could have sent me a PM about this too:confused:
In case you didn't notice, chaparal2300 and AddictedtoHp were both banned an hour before you posted this.
Speak your mind all you want as long as its done without calling other members and their family members durogatory, profane and sexually explicit degrading names.

Baja226sport 11-13-2013 02:51 PM


Originally Posted by Griff (Post 4026387)
chaparal2300 and AddictedtoHp were both banned


:drink:

mosi 11-13-2013 02:54 PM


Originally Posted by Griff (Post 4026387)
I guess you could have sent me a PM about this too:confused:
In case you didn't notice, chaparal2300 and AddictedtoHp were both banned an hour before you posted this.
Speak your mind all you want as long as its done without calling other members and their family members

durogatory, profane and sexually explicit degrading names.




de·rog·a·to·ry ......
.
.
.
...... just trying to do my part........ ;)



.

Skullkrusher 11-13-2013 03:15 PM

Why did he ask this question?:

"Has anyone removed there bravo one gears and replaced them with a set out of another bravo one. Have a mechanical and cosmetic issue with bravo drive and looking to remove contents from case and install in alternate bravo one case. It does not look complicated, best I can tell it's not calling for any special tools. As I understand it, it depends on year make model of drive.

I've popped the top on both drive's I just can not bring myself to pull the trigger on attempting this without some input. At this point the upper portion is all that is of concern.

The way this is set up, using a spanner wrench I would remove the over sized nut, remove top cap, remove back cap. disconnect shifter mech. pull shifter pin, pull front drive shaft and gear assembly, and pull the main gears out of center. change gasket's seal's etc. and reassemble back into other drive case. Am I missing something here or is it that easy. "

Sounds like he's going to put his junk parts in Sick's housing and return it or claim it came that way.

the deep 11-13-2013 03:34 PM


Originally Posted by Skullkrusher (Post 4026414)
Why did he ask this question?:

"Has anyone removed there bravo one gears and replaced them with a set out of another bravo one. Have a mechanical and cosmetic issue with bravo drive and looking to remove contents from case and install in alternate bravo one case. It does not look complicated, best I can tell it's not calling for any special tools. As I understand it, it depends on year make model of drive.

I've popped the top on both drive's I just can not bring myself to pull the trigger on attempting this without some input. At this point the upper portion is all that is of concern.

The way this is set up, using a spanner wrench I would remove the over sized nut, remove top cap, remove back cap. disconnect shifter mech. pull shifter pin, pull front drive shaft and gear assembly, and pull the main gears out of center. change gasket's seal's etc. and reassemble back into other drive case. Am I missing something here or is it that easy. "

Sounds like he's going to put his junk parts in Sick's housing and return it or claim it came that way.

Exactly and this is not his first rodeo . He needs tarred and feathered .

Wildman_grafix 11-13-2013 03:35 PM

How do you look up a posters IP address?

kidturbo 11-13-2013 03:44 PM

:grinser010:

mike tkach 11-13-2013 06:05 PM


Originally Posted by Skullkrusher (Post 4026414)
Why did he ask this question?:

"Has anyone removed there bravo one gears and replaced them with a set out of another bravo one. Have a mechanical and cosmetic issue with bravo drive and looking to remove contents from case and install in alternate bravo one case. It does not look complicated, best I can tell it's not calling for any special tools. As I understand it, it depends on year make model of drive.

I've popped the top on both drive's I just can not bring myself to pull the trigger on attempting this without some input. At this point the upper portion is all that is of concern.

The way this is set up, using a spanner wrench I would remove the over sized nut, remove top cap, remove back cap. disconnect shifter mech. pull shifter pin, pull front drive shaft and gear assembly, and pull the main gears out of center. change gasket's seal's etc. and reassemble back into other drive case. Am I missing something here or is it that easy. "

Sounds like he's going to put his junk parts in Sick's housing and return it or claim it came that way.

my guess that was his plan!

commandersander 11-13-2013 06:35 PM

Griff.....

Not tryin to throw u to the wolves.....so to speak.....

All I meant to say was I got hand slapped, and obliged your request.

In the end, rules aside, it appears as though you took the same side as me.....even though it was not my business.

I'm mean no ill will, rules be damned, to anyone here......until the next Steve Debo rears his head. I, will again as now, defend my brethren to the inth degree. Steady as she goes, till all goes well.

Debo-typical members here, before.....now.....and later......should (in my belief) not be afforded protection at the expense of...

ME.....and any other member that has shown a commitment to the site, done honest deals, and only added to the overall experience for others.

Yes, I benefit from being a member.
Yes, I love this place. It's "home"
Yes, I want to stay.

I just ask for a green light on the next douge bag (there is always one more) without fear of a time out or ban. We are all here for each other, and I would think the value of that alone makes this place better than the other options available out there.

phragle 11-13-2013 07:05 PM


Originally Posted by Wildman_grafix (Post 4026429)
How do you look up a posters IP address?

You let speedy do it and post the results/ screen cap


All times are GMT -5. The time now is 03:17 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.