On the way home with Carrera raceboat
 

Only 32' single step racehull ever made by Humberto..
They made a bunch of 24 and 30 straight vee raceboats and two 36 twin step raceboat.. This is the only 32..
3200mile trip,still 900 to go..
Love the boat,,hate the drive,LOL..

https://fbcdn-sphotos-h-a.akamaihd.n...84242021_n.jpg

Any pics of the 36's??? That's pretty cool

small trailer?

Nice! Very rare also!

very small....

trailer is about three feet too small as far as length,bunks always stick out past the end of trailer like that on aluminum trailers ,,my other one is exactly the same even though its big for my 27,I plan on swapping the trailers when i get a chance.
as far as weight its is fine considering its a race boat with no engines or drives..Weigh the same as my 27 with engines and drive. So far have towed it over a thousand miles on way home and so far has towed like a dream and I didnt even need a $100k semi to tow it like most OSO experts would have you believe....
:D

The CocaCola raceboat, 36 Carrera
https://scontent-a-sea.xx.fbcdn.net/...25792865_o.jpg
The El Nuevo Dia raceboat, 36 Carrera , PROA champ two years in a row back in the 90s..
https://fbcdn-sphotos-e-a.akamaihd.n...83111649_n.jpg

I think that is the old let it roll boat from the GLOPRA circuit. That spent a good amount of years in Ohio.. I bet CIG3 or the other Eastlake guys would now more about it..
Jr,

I know pretty much the full history of the boat except for the time when it was "working"..
and yes I picked it up from Mike in Ohio..
:)

Thats cool to hear. I do remember it seeing it around for better part of the late 90s and early 00s. Actually crawled around on it with my pops. Glad to hear its going to a good home!

Could tell by the big hatch it was a working boat, please tell more ..

No one would guess it was a working boat with that little deck hatch:D:grinser010: nice to see it went you.

Yeah,gotta do something about that,,dont plan on picking up any chicks that big.. :-)
Finally got home.. Gonna sleep for a couple days now..
Nite nite..

Home:
https://fbcdn-sphotos-c-a.akamaihd.n...18631425_n.jpg

very nice what kind of power are you gonna put in it

no idea,,,cleaned it and wrapped it up for now,,wont really do anything with it till winter hits..
Since I dont have a lot of extra toy money probably be a couple stock 350s or 454s.

Took a few side by side pics with my 27 Carrera,, the 32 is a much wider and taller boat.
https://scontent-a-iad.xx.fbcdn.net/...05561727_n.jpg

Wasn't let it roll a scarab?

Also on your 27 is the trim tabs mounted straight across instead of following the V. Also they look to be mounted completely far outside to far outside. How well has that worked for your app. Just asking. I understand running at top speed the tabs are completely out of the water especially being far outside(s).

so far tabs have worked great,, yes at high speed they are out of the water if they are trimmed all the way up so they do not drag , however if you trim them down they will hit the water just fine since they are 30" long...

Couple Pictures of Let It Roll
 

Here are a few when it raced


.[ATTACH=CONFIG]535528[/ATTACH][ATTACH=CONFIG]535529[/ATTACH]

If I could get decent scans of those that would be awesome!
Just email me and let me know what I owe you.
[email protected]

Have a pair of Mercury 454/440hp Cyclones with Gils and
dry exhaust out of the 30 Carrera/Condurre I parted out..
I swapped out the intakes for newer ones and upgrading the valve springs,
but otherwise staying the same.
pic:
https://fbcdn-sphotos-d-a.akamaihd.n...10460952_o.jpg

They have some hours but are solid,,when Im ready Ill
get some used bravos to get her running.
Wont be a speed demon but should run in the low 80s.
Gonna be a long term project but Im hoping to have her see water by next summer (2016).

sounds like a nice boat, I clicked on your pics and it says content not found. Could you repost them?