2010 300 Convincor 496HO 58mph help!!
2010 300 Convincor with a single 496HO 25 hours
24 pitch three blade prop, 1.5 Bravo X drive. Its getting all the RPMs it should from a 496HO WOT its top speed is only 58mph!! What is wrong with the boat???? Should run 10 mph faster. Thanks |
My guess is that's about all she is going to run in a 30. 58-64 depending location. Temps and water conditions.
In a 26 zt your lucky to see 62-65 with same motor |
[QUOTE=CumberlandDayton;3924557]2010 300 Convincor with a single 496HO
What is wrong with the boat???? Truth? It needs a second 496HO. |
Is it the 300 from alton blakley ? I don't think it's a notched hull.
|
[quote=powerplay j;3924625]
Originally Posted by cumberlanddayton
(Post 3924557)
2010 300 convincor with a single 496ho
what is wrong with the boat???? Heck yes!!! I know, for sure. Truth? It needs a second 496ho. |
Originally Posted by checkeredpast
(Post 3924769)
Is it the 300 from alton blakley ? I don't think it's a notched hull.
So they made notched and non-notched hulls in the same boat? |
Originally Posted by noyzee
(Post 3924588)
My guess is that's about all she is going to run in a 30. 58-64 depending location. Temps and water conditions.
In a 26 zt your lucky to see 62-65 with same motor Checkmate says it should run 68 mph with a single 496HO |
There is a 300 with a 525efi that runs 81 mph. 58 to 81 mph with 100-115 more hp???!!
|
Originally Posted by CumberlandDayton
(Post 3924852)
There is a 300 with a 525efi that runs 81 mph.
|
You can get the 300 with a notched transom or without , notched is faster. I tried a 3 blade prop on mine and it didn't like it, blowout and lots of slip so I went back to the 24 bravo. Later I got bblades to build me a prop, brett put some cup in it and it was much better.
|
All times are GMT -5. The time now is 06:23 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.