![]() |
Let's see some pics
It's wintertime, for most of us that is. Whenever I visit this forum, I can almost hear crickets. Lets see get some action in the C-mate section. Let's see some pics.... In the water, on the trailer, motor(s).....whatever you have. Also include a little info. Power, speed, year, prop etc, and whatever you'd like to add.
|
Re: Let's see some pics
3 Attachment(s)
He's mine,
1989 251 Convincor. 548hp 502, 72mph with a 23 Hydromotive. |
Re: Let's see some pics
1 Attachment(s)
Here is one of my '99 259 Convincor. At the time it had a stock 454 Magnum MPI. I would get 67 on GPS, spinning a labbed 26" Bravo 1.
|
Re: Let's see some pics
3 Attachment(s)
2003 ZT260, 540ci quadrotor whipple, Bmax 1.30 drive, Bravo 26", 100+mph
|
Re: Let's see some pics
Originally Posted by zt260
2003 ZT260, 540ci quadrotor whipple, Bmax 1.30 drive, Bravo 26", 100+mph
Holy (hold on to something) Shlt Batman!!! :D |
Re: Let's see some pics
Nice Looking Hardware Boys!!! Keep The Pictures Coming!!
|
Re: Let's see some pics
Vinny, how about a picture of the new power?
BTW- Are you changing to checkmate 540? |
Re: Let's see some pics
Dave,
I will post a few pictures when it is complete. That will be soon. As far as changing my screen name, I have lurking around here for so long , I guess I should just keep it the way it is. I sent a picture directly to you. Incomplete and all. |
Re: Let's see some pics
1 Attachment(s)
This may not work.
|
Re: Let's see some pics
1 Attachment(s)
Well it did. Motors.
|
Re: Let's see some pics
Nice boats fellas, keep them coming!!
|
Re: Let's see some pics
Originally Posted by Quiet Storm
Well it did. Motors.
|
Re: Let's see some pics
Close, only 3 1/2.
The Whipple's added a lot more height to the engines than I was lead to believe. I was told they added two inches to the height. Later I found out that's on the 502 engines. The 454's get more like six. :eek: It took a bit of thought but it worked out. |
Re: Let's see some pics
1 Attachment(s)
Here's a shot from a COPS run.
|
Re: Let's see some pics
3 Attachment(s)
'98 283 Convincor, twin 7.4.
63.4mph on GPS spinning 22p Hydromotive QIV hitting the rev limiter. I have the ride figured out this year now it is time for some speed. Back to throttle up for some tuning :D |
Re: Let's see some pics
|
Re: Let's see some pics
aren't u glad u left that old tech behind to come over to the fast side???!!!!
|
Re: Let's see some pics
Not really. I bought this boat because the Check was too fast & too big for my wife. Sometimes you have to compromise.
http://www.offshoreonly.com/gallery/...CT0005-med.JPG |
Re: Let's see some pics
|
Re: Let's see some pics
Originally Posted by Shah Mat
He's mine,
1989 251 Convincor. 548hp 502, 72mph with a 23 Hydromotive. Like that top picture!... :D :D Oh, wait, I took that!! :p :p :drink: :drink: Patti |
Re: Let's see some pics
1 Attachment(s)
I finally got the new 540 completed..
|
Re: Let's see some pics
That thing looks great! Did you have it on a dyno?
|
Re: Let's see some pics
Yes I did. Take a look at the attached link to a thread a while ago.
http://www.offshoreonly.com/forums/...=540+dyno+today |
Re: Let's see some pics
Link won't work. :(
|
Re: Let's see some pics
|
Re: Let's see some pics
Vinny, The engine looks great. I know you have to be dieing to get in the water.
Where did that flame arrestor come from? Nice job. |
Re: Let's see some pics
Hey Dave,
I haven't seen you around for a while. I dropped you an e-mail yesterday. The flame arrester is a Keith Eickert. I got it from Too Old, Trick Marine from OSO. A local painter did the air brush work for me. |
Re: Let's see some pics
Wow, great numbers from the dyno. Your Checkmate has to fly.
|
Re: Let's see some pics
Vinny, Is your 540 closed cooled? Looks great!, Doug
|
Re: Let's see some pics
Yes it has closed cooling.
|
Re: Let's see some pics
3 Attachment(s)
A few of my 28
|
Re: Let's see some pics
SharkeyMarine, what speeds are you seeing in your 28'?
|
Re: Let's see some pics
Best run was 82mph on speedo. Lately, around 78 to 80.
My props could use some tuning up... ;) |
| All times are GMT -5. The time now is 05:30 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.