222 stinger speed...
#1
Registered
Thread Starter
Join Date: Sep 2003
Location: catskill NY
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
222 stinger speed...
just went out for first time on Sunday...57 mph on gps... With
stock merc 260 & 21 pitch quicksilver stainless prop.. what kind of speed are you guys seeing with your 222's and what is your set up ? Thanks.......
stock merc 260 & 21 pitch quicksilver stainless prop.. what kind of speed are you guys seeing with your 222's and what is your set up ? Thanks.......
#2
Re: 222 stinger speed...
That sounds about right from all the info i ave read and heard about them with the small blocks. The bigblock will break you into the mid 60's if its stock. I have never had mine on the water since i bought it with no engine or drive.....and once its done it will have about 420-450hp....so i dont know what its gonna be doing yet. People have said it should run it the high 70's with the right prop!
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#3
Registered
Thread Starter
Join Date: Sep 2003
Location: catskill NY
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Re: 222 stinger speed...
that's cool.. I have a K&N flame arrestor, hydro motive cone and a set of EMI thunder manifolds to put on her I would like to see 60+mph will post results soon as I install all of it...good luck with yours ...Let us know how it runs...
#4
Gold Member
Gold Member
Join Date: Feb 2004
Location: Hollywood, MD
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
Re: 222 stinger speed...
I have the 260, with a cam job and a few other minor things done (person i bought it from claimed 300hp, but i doubt it) and a 23 pitch ballistic prop. It runs 60 on gps with one person. Its an older engine, so i done run it wide open for more than a short period of time.
#6
Re: 222 stinger speed...
Yo Mange...check this out! Its not the 222 but the slightly smaller 202
http://cgi.ebay.com/ebaymotors/ws/eB...%3ASS%3AUS%3A1
http://cgi.ebay.com/ebaymotors/ws/eB...%3ASS%3AUS%3A1
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#7
Gold Member
Gold Member
Join Date: Feb 2004
Location: Hollywood, MD
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
Re: 222 stinger speed...
Mine is for sale. I was planning on selling it at the end of the summer, but for the right offer, it could go now.
I would describe it as in good enough shape to use for the summer, but needs cosmetic work. Its an ongoing project for me. I'm having a new sunpad covered as we speak, and i am putting in rubber flooring this weekend.
I would describe it as in good enough shape to use for the summer, but needs cosmetic work. Its an ongoing project for me. I'm having a new sunpad covered as we speak, and i am putting in rubber flooring this weekend.
#9
Registered
Join Date: Jan 2003
Location: Savannah Ga
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Re: 222 stinger speed...
if you get a 222 stinger in the 70's better hold on!. i had one w/ stock 365 magnum that ran 60 when i got but motor was sh$t..put a new 454 mag in and ran 60...went to 750 holley...62...crane134241{i think} cam..still 62...23p merc mirage plus 62 and wild....finally puy stainless exhaust on and it was like a new boat...rocket out the hole and saw 68 gps...but was a ***** to drive to it..it did finally lift up and ride like it was on 1" of the vee. u also should put a straight edge on the last 24" of the strakes..cc built my 87 with a hook to keep the bow down which i took out and was glad i did....hope this helps!
#10
Registered
Join Date: Jul 2006
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re: 222 stinger speed...
I Have An 86 222 Stinger With A 468 Bbc At Sea Level (sacramento Got 74 Out It With 1/2 Tank Of Gas But The Hull Really Isnt Designed To Go Over That This Was On 3 Ft Chop Going Straight Into The Rollers ) Spinning A 21 Stainelss But I Still Have The Alpha Wouldnt Recomend Putting That Much Power Behind The Boat It Can Be Very Unpredictable At Those Speeds But A Very Fun Boat Proud Owner