Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Chris Craft (https://www.offshoreonly.com/forums/chris-craft-155/)
-   -   Prop size for 260 Stinger (https://www.offshoreonly.com/forums/chris-craft/100979-prop-size-260-stinger.html)

MNuttbrock 04-18-2005 12:30 PM

Prop size for 260 Stinger
 
I have a 260 stinger with the original 350s that still run strong. I was wondering if anybody has experimented with different props, I currently have 21 pitch Quick Silver props on it.

fund razor 04-18-2005 12:35 PM

Re: Prop size for 260 Stinger
 
Yeah... I have that boat.

I am running 23p mirage.

It is costing me a little top speed but my cruise is good, so I leave them on.

I bet with 21s I could turn a few more RPMs.

But I have Cobras, and you probably have mercs.

MNuttbrock 04-19-2005 10:09 AM

Re: Prop size for 260 Stinger
 
I do have the mercs, with the 21P (Quick Silver Mirage props) it shoots out of the hole faster than my friends new 27' Checkmate w/ 385 hp 454 but revs out at 4500 at 55 mph on GPS.

Do you know what the ratio is in thos Cobra drives???

fund razor 04-19-2005 12:40 PM

Re: Prop size for 260 Stinger
 
1 Attachment(s)
I lied. I am running the Raptures. Mirage ripoff for OMC.

I wanna say the Cobra ratio is 1:1.65
The Alpha is 1:1.5 isn't it?
My book is at home.

I get out of the hole pretty good, but I stop twisting at about 4100 or 4200.
I know that is a little low, but that gives me a good midrange.

I used to spin a 21p cleaver on my single merc260 at about 4600.

Member "Glassdave" has an 85 260Scorpion (basically same boat) he has twin SBCs and merc alphas. I think he is running 21p props and turning them a little faster. I know he is faster than I am.

Maybe check with him. He is on a couple threads and will answer a PM.
He's a good guy.

Good luck.

Got pics?

Here's mine.

fund razor 04-19-2005 12:41 PM

Re: Prop size for 260 Stinger
 
I rev out at like 4100 and I am going 52 on the GPS.

glassdave 04-19-2005 10:21 PM

Re: Prop size for 260 Stinger
 
hehe . .yea . .i'm in the same boat. :D i run 23 quicksilvers and i like them alot but feel they are just a bit to big. they cary the bow great. the best i have seen is 60.9 on gps at about 4500 trimmed to the moon and in the perfect water. my motors are fresh so i am going to try and warm the motors up a bit more, maybe a bit more cam an some vortech heads.

fund razor 04-20-2005 08:14 AM

Re: Prop size for 260 Stinger
 

Originally Posted by glassdave
the best i have seen is 60.9 on gps at about 4500 trimmed to the moon and in the perfect water.

Perfect water?
Must have been out of town. :D

I wish I had fresh power. :(

MNuttbrock 04-25-2005 10:36 AM

Re: Prop size for 260 Stinger
 
Thanks for the info guys, I think I'll try to find me a pair of quicksilver 23p. I'll let you know in a couple weeks how it went.

I'll post some pictures when I get them.

fund razor 04-26-2005 08:42 AM

Re: Prop size for 260 Stinger
 
then there is always same pitch but slightly bigger.

fund razor 04-26-2005 08:42 AM

Re: Prop size for 260 Stinger
 
or try 23s, but like a half inch smaller than the 21s.


All times are GMT -5. The time now is 05:31 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.