|
Nice! You might want to post it on the facebook chriscat boats page for more targeted potential buyers!
got more details to share here? |
I tore the transom out from wood but had delamination in fiberglass on top of the hull... funny thing is, there is some sort of ... not sure what... but seems like some type of... glue?
or is it simply salt water intrusion that the salt dried there? Have'nt taste it thought... what could it be? Does not matter what is is in reality since it is a ground up resto but.... https://cimg2.ibsrv.net/gimg/www.off...85a778091.jpeg https://cimg4.ibsrv.net/gimg/www.off...e0324c45b.jpeg https://cimg6.ibsrv.net/gimg/www.off...4d4cdb211.jpeg https://cimg8.ibsrv.net/gimg/www.off...43c7caff0.jpeg https://cimg7.ibsrv.net/gimg/www.off...4f581a348.jpeg https://cimg6.ibsrv.net/gimg/www.off...c33d824fe.jpeg |
Made myself a grinding tent and started to dig!
man is it gonna take a long time to grind it all out!!!!! in one hour, i was able to gring only like 1 foot square!!!!!!!!!!!! luckily i am not in a hurry but that is not motivation to see how ling it takes!! https://cimg9.ibsrv.net/gimg/www.off...c473d8d1b.jpeg https://cimg3.ibsrv.net/gimg/www.off...84fdbad9f.jpeg https://cimg5.ibsrv.net/gimg/www.off...094ff9d81.jpeg |
Total 2:15 for the. Little left side clean up...
any faster tool than a grinder? https://cimg4.ibsrv.net/gimg/www.off...a5503b804.jpeg First snowstorm this year ! https://cimg5.ibsrv.net/gimg/www.off...fa30eba0c.jpeg |
1 more hour...:)
https://cimg6.ibsrv.net/gimg/www.off...2069b3a3d.jpeg |
Finally found something with some real bite! I had like a good big 1/4 thick to eat and neither 36 or 24 grit was rough enough! It would take me like 1 hour per sq ft but now i did like 3 sq ft in like 45 min!
its almost fun ! https://cimg8.ibsrv.net/gimg/www.off...a4801add4.jpeg https://cimg9.ibsrv.net/gimg/www.off...2bf94f313.jpeg https://cimg0.ibsrv.net/gimg/www.off...65bc4ebd7.jpeg https://cimg1.ibsrv.net/gimg/www.off...f4e902ce3.jpeg |
Transom is done! Very nice tool !
ground out or cleaned out the under tank section too... can you say balsa cored hull bottom? Sure yeah! And hull side are foam cored... i could see some black thru the laminated showing the balsa... thought it could have been rotted from the black... but i came direct on the balsa on three spots with very very light grinding... its not rotten but the balck comes from the space in between the balsa pieces... maybe it was a little dry laminated? Whats your thought? https://cimg2.ibsrv.net/gimg/www.off...eb4a54f1d.jpeg https://cimg3.ibsrv.net/gimg/www.off...69aa740fd.jpeg https://cimg5.ibsrv.net/gimg/www.off...afc5d9594.jpeg https://cimg7.ibsrv.net/gimg/www.off...d1bdaf5f3.jpeg |
I willtake my moisture meter to see
|
I willtake my moisture meter to see
|
Sooooo... much later!
I spent a 30 min and dug the cabin floor... friends would tell me: it tested dry why would you take the floor out?? I would answer because i wanted to see, and know every inch of the boat, make sure everything is super clean, no debris, no oil stains, so on and so forth... well ! happy i did ! mice had built there home in there! Needs to be cleaned up! https://cimg1.ibsrv.net/gimg/www.off...6d87f57ab.jpeg https://cimg2.ibsrv.net/gimg/www.off...b17db77bb.jpeg https://cimg6.ibsrv.net/gimg/www.off...d7220e5a7.jpeg https://cimg0.ibsrv.net/gimg/www.off...0e56890d6.jpeg https://cimg4.ibsrv.net/gimg/www.off...264edb6ff.jpeg https://cimg5.ibsrv.net/gimg/www.off...ff373ede3.jpeg https://cimg7.ibsrv.net/gimg/www.off...ab725f0a2.jpeg surprisingly the underfloor was not glassed but still in very good shape! The pictures shows much more black than in reality. There is no rot and it is very solid! But i will put new floors in anyways, glassed both sides |
| All times are GMT -5. The time now is 03:29 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.