Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Chris Craft (https://www.offshoreonly.com/forums/chris-craft-155/)
-   -   calling all 313 cc scorpions!!! if any!!! (https://www.offshoreonly.com/forums/chris-craft/202329-calling-all-313-cc-scorpions-if-any.html)

stevekyp 01-28-2009 07:39 PM

calling all 313 cc scorpions!!! if any!!!
 
:cool-smiley-027:Need to talk to someone on these center console boats.
I have a friend looking for some advice.

DareDevil 01-31-2009 09:31 AM


Originally Posted by stevekyp (Post 2788192)
:cool-smiley-027:Need to talk to someone on these center console boats.
I have a friend looking for some advice.

All i can say is ,,,same hull then 312 stinger,,,good boat if not delamed or wet in the core.

msteenson 03-05-2009 03:03 PM

Your Scrpion
 
Hi I own two scorpions and a 314 stinger too. ask away,

Mark

stevekyp 03-06-2009 08:38 PM

Hi Mark
me and my brother in law are doing his 87 313 cc over
i just wanted to know how this boat rides and handles in the water.
he got it as a project and were still doing glass work.
the previous owner put 3x200s
cant wait to finish it.
will post pics soon!!!

msteenson 03-27-2009 03:57 PM

Not sure what work you are doing, but other than transom issues which by now you probably know about, the area underneath the fuel tank is susceptible to cracking once you hang the outboard bracket on her. The stress and twisting resonates in that area. Also the two sections on port and starboard of the entry into the cuddy have a habit of getting spider cracks, so while you're glassing away, you might want to put some extra matting up there.

As for the ride, they are amazing. Very little bow rise on the c/c's. The whole boat just rises up at once. If you email me at msteenson@ascendhospitality i can give you more.


]Hi Mark
me and my brother in law are doing his 87 313 cc over
i just wanted to know how this boat rides and handles in the water.
he got it as a project and were still doing glass work.
the previous owner put 3x200s
cant wait to finish it.
will post pics soon!!![/QUOTE]


All times are GMT -5. The time now is 07:04 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.