|
Yea I always loved running with the devil such a clean boat well put together. Hoping one day to run mine lol. Enjoy that thing !!
|
Originally Posted by thisistank
(Post 4899684)
mine? Thanks. Gonna go run it this weekend in havasu then drag it back to California for some summer ocean running.
can’t wait to see yours all back together. Such a nice restore and beautiful job!! |
The other thing I found when spinning in - the boat (Especially Top Gun), flies a lot more level when out of the water, seems to fly true and straight. The docking absolutely stinks, so it's a trade off. BUT - if that was ever an issue, may want to consider. It also reduced my porpoise. When I install 2" spacers, a lot of the porpoise goes away also - so Tank is correct, if you drop those drives it will help a lot. It's gonna kill your top end, but the boat will be more usable and enjoyable.
|
Originally Posted by frickstyle
(Post 4899717)
The other thing I found when spinning in - the boat (Especially Top Gun), flies a lot more level when out of the water, seems to fly true and straight. The docking absolutely stinks, so it's a trade off. BUT - if that was ever an issue, may want to consider. It also reduced my porpoise. When I install 2" spacers, a lot of the porpoise goes away also - so Tank is correct, if you drop those drives it will help a lot. It's gonna kill your top end, but the boat will be more usable and enjoyable.
|
Originally Posted by donzi matt
(Post 4899739)
I'm thinking it will help my top end in my case, it was literally impossible to hold this boat WOT and keep the props in the water. With the 2" spacers my propshafts are now inline with the bottom of the boat, which I think should be about right. I hope it's right, because I can't go any lower without switching back to boxes.
|
Originally Posted by frickstyle
(Post 4899746)
You will probably want to be running 18" diameter props also. Even with the bottom was my highest setting (no spacers - as rigged), I've been a full 2" below - I believe the 1" spacers and spinning in will be my sweet spot (1" below surface). I think you'll be better off without boxes in that setup. :drink:
|
Im sure the bottom of the boat has been checked for any deformation that might induce the hop ? Didn't Tim own this this boat at one time
|
Originally Posted by F-2 Speedy
(Post 4899749)
Im sure the bottom of the boat has been checked for any deformation that might induce the hop ? Didn't Tim own this this boat at one time
|
Originally Posted by frickstyle
(Post 4899712)
We'll be out, not waiting for the invite. Can help clean, gas, dock, etc. !!!
|
Originally Posted by donzi matt
(Post 4899748)
I have a set of 18" props to run this time around, pitch should be close but it escapes me right now what they are. They came from Carpe Diem, Dan traded me for those Rolla 5 blades that blew up both of our engines, lol.
I sent you a text I got a pair which worked awesome on my boat , 5 blades is the only way to go.. plus 18* rake |
| All times are GMT -5. The time now is 12:46 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.