Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Best props for a 35 cafe racer (https://www.offshoreonly.com/forums/cigarette/114156-best-props-35-cafe-racer.html)

edfebinger 10-11-2005 03:15 PM

Best props for a 35 cafe racer
 
I HAVE A 35 CAFE RACER WITH 3 BLADE 25p PROPS. Power is 502 500 HP. A buddy lent me a set of 4 blade 24p props which seems level in mid range performance.
Does anybody have ideas how this cig will best perform using either 3 or 4 blade props and whats the best pitch?

mfmviper 10-11-2005 07:22 PM

Re: Best props for a 35 cafe racer
 
26p 4 blade works great :evilb: :evilb:

SKRAMER 10-12-2005 08:28 AM

Re: Best props for a 35 cafe racer
 
Well I'm trying to figure out the same thing. I run a 26 hydromotive four blade.I can only turn it at 47 to 4800. I've tried 23 four blades and can turn them at 5200. with only little gain on the top end and a loss of cruise speed. How many rpm can you turn the 24s?

CigDaze 10-12-2005 09:18 AM

Re: Best props for a 35 cafe racer
 
For all-around best performance, 4-blades are far superior to 3-blades on the Cafe. I didn't like 3-blades at all, they blew out, and didn't plane well and didn't like trim at all. I run Bravo 1's, and the mid-range is great, top end might be slightly less than 3-blades, but all around a better prop. Pitch will depend solely on your HP and rpm range.

henrys 10-12-2005 12:05 PM

Re: Best props for a 35 cafe racer
 
Hi guys
I have a cigarette 38 top gun with 565 cu.in and speed masters #3a Im running with 18 by 30 props 3 blades it runs 55 at 3000 rev but the top end is 3800 and 4000 . Why the difference in rev in the same right side changin engines trans ?

wich prop would you consider it will be the best if you have the experience with this type of boat

thanks
henry

Offshoreracr 10-12-2005 12:57 PM

Re: Best props for a 35 cafe racer
 
I run 17.25 x 28 pitch 4 blade clevers on my Cafe, 557's and Speedmasters. It turns 5100 RPM with a full load of fuel and 4 people, I run a 1.62 gear ratio in the drives. I would look for some 4 blades, the overall performance is much better. You will need to cut the diameter down to at least 17". My props were 18" when I got them and 4700-4800 was the best I could get out of them.

henrys 10-12-2005 01:56 PM

Re: Best props for a 35 cafe racer
 
thanks

at full load how many mph your boat is doing?

Offshoreracr 10-12-2005 04:47 PM

Re: Best props for a 35 cafe racer
 
With 18 x 28 4 blades it ran 73.5 @ 4800 RPM on GPS. With 17.25 x 28 4 blades @ 5100 it ran 77 on GPS. There is very little prop slip with that big of a prop.

comp 10-17-2005 06:13 AM

Re: Best props for a 35 cafe racer
 
hey E. P. what do you cruise at.
i hear needles up( do you have a cig or a bayliner?)
awesome buddle to lend you his props
well you know what i cruise at these days
lets just say i am saving alot of $ on fuel
see you in FL.

z.zuperboat 10-28-2005 01:21 PM

Re: Best props for a 35 cafe racer
 
Henrys Those props are way to big . Your going to hurt the motor having the motor at full throttle and only turning 4000 rpm. Any interest in selling them ? end me a PM if interested.


All times are GMT -5. The time now is 03:30 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.