Anchor for a Bullet
 

I bought a 1990 31-foot Bullet. Under the rear bench seat (on the starboard side) is a mount for an anchor. Does anyone know if this is "standard equipment" or after-market? Does anyone know what anchor fits in there, and is it big enough for a Bullet?

Thanks! :cool:

Re: Anchor for a Bullet
 

Or, should I just a Box Anchor? If so, what size? Small or Large?

Thanks (again)! :cool:

Re: Anchor for a Bullet
 

I used a small box anchor with my Bullet. It worked fine. So fine, that when it came time to get an anchor for the Top Gun....I bought a box anchor, a small one!!! They are awesome.

Re: Anchor for a Bullet
 

Large box anchors are overkill... they work great, but are reasonably big & heavy. I was always worried about it beating into the side of the boat while pulling it up. Small will work fine.

I think the "factory" anchor is somewhat standard. I'll try to grab a pic of mine tomorrow.

Re: Anchor for a Bullet
 

Standard in every Bullet.

Re: Anchor for a Bullet
 

Mine had the anchor in place when I bought it. Nice sanitary intallation, with a mount and screw in threaded lock nut. Guess they all had one.

John

Re: Anchor for a Bullet
 

Yep, that's the mount that is there?

Where can I find the anchor that fits in there?

Re: Anchor for a Bullet
 

Call Phil at lipship

Re: Anchor for a Bullet
 

i have the stock anchor but i also carry a box anchor and use it instead

Re: Anchor for a Bullet
 

Thanks everyone. I ordered a Box Anchor. :cool: