TG BOW Cover
 

My 99 TG has a second set of turn buckles (see pics) that I was told was for a bow cover. I'm guessing the cover had a nose cone sewed into it and the top end attached to the turn buckles.

Q?: Does anyone have/use this set up and if so do you have any pics? I'm looking to have one made UNLESS someone is looking to sell one? I'm really in the market for a full cover but I'll work with what I have.

The spider chit is taking it's toll on my deck.

Re: TG BOW Cover
 

My 94 has double snaps across the front (both canvas's on one snap)...........nice set up

Re: TG BOW Cover
 

Seems kinda redundant to add another set of snaps to have a front bow cover. What should have been done is the original ones replaced with a longer version and then you would have only had one set on the boat. Of course a little late for that now. I have made a coule of bow covers for Cigs for fellow OSOers and sent them to them. What is required tho is for the customer be able to install the "washer" side of the "turnbuckle" fastener. This requires a special tool. Let me know if you need more info.

John

Re: TG BOW Cover
 

I am also looking for a bow cover, but i think i want one that pulls over the bow and has a elastic that you pull and it will hook by sticking a pin in a hole on the side rub rail

Re: TG BOW Cover
 

Here is ours

Re: TG BOW Cover
 

Thanks all. What I really need is a pattern or sample to have another one made. Does anyone know where I should start? Maybe someone has given theirs to a local shop for this before? Any suggestions would be great.

Re: TG BOW Cover
 

I might be able to work something out for you, since I have access to a Top Gun to use as a pattern. Would need to discuss various other details tho, so send me an email. I just made on for another OSOer for a Bullet.
[email protected]