Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   38 Top Gun Project (https://www.offshoreonly.com/forums/cigarette/157512-38-top-gun-project.html)

tanner 05-06-2007 12:29 PM

3 Attachment(s)
The removing of the tanks

thisistank 05-06-2007 01:51 PM

Tanner, what type of paint scheme you thinking of going with?

Remember, you can always do a vinyl wrap for a fraction the cost.

tanner 05-06-2007 02:13 PM

Tank ,something like to 2007 blue and white top gun at Lip Ship.

Cant get the link up Sorry

thisistank 05-06-2007 06:52 PM

1 Attachment(s)

Originally Posted by tanner (Post 2118372)
Tank ,something like to 2007 blue and white top gun at Lip Ship.

Cant get the link up Sorry

Yea, that boat is SICK! Great colors.

It would behoove you to look into wraping it with graphics. You're talking 3-5k compared to 40+k. You could do vinyl and change the graphics every two years for 20 years and most likely still have not paid as much as paint.

We're very happy with the vinyl on our boat. Even Steve (oso) asked, "is that vinyl?" when he was tied up next to us in Havasu. The new 3M vinyl they have is amazing (not dull like vinyl used to be) and they can do any design, shading, color, etc.

Just a thought. But hey, if you have an open checkbook, go for paint.:drink:

Here's a shot of our vinyl.

tanner 05-07-2007 05:36 PM

Ordered the Lonseal flooring (Lonplate 1) today, all new guages from Livorsi ( Monster carbon fiber) and scoops for the hatch!

cig1988 05-08-2007 03:46 AM

I've got a ? for ya Tanner. It looks like you had to cut the tank for removal. When you install the new tank is there enough room to slide back towards the bilge bulkhead ?

tanner 05-08-2007 06:24 AM

Yes I had to cut out a center section and then slide out the front and rear sections. The new tank will be approx 30 gallons less as it has to fit in the 79 1/2 " opening of the floor. the old tanks were 127 Gallons each. I spoke to Craig Barrie and he confirmed they built the boats by setting the tanks and all the plumbing in the hull before they attached the top . Kind of a pain in theass.... but know I will know the boat in and out. The new owner will really love that everything is new !!!

cig1988 05-08-2007 06:48 AM

It was pretty clever attaching the eye hook and the come-a-long. I had the floor on the Bullet a few years back scratching my head about that. Good work !!! Take alot of pics. I'd like to see the progress. Are you replacing both of them ?
If ya dont mind how much were they ?
Stan

tanner 05-08-2007 12:38 PM


Originally Posted by cig1988 (Post 2120186)
It was pretty clever attaching the eye hook and the come-a-long. I had the floor on the Bullet a few years back scratching my head about that. Good work !!! Take alot of pics. I'd like to see the progress. Are you replacing both of them ?
If ya dont mind how much were they ?
Stan


I am doing both of them, I am already there, so why not go the extra mile and be done with it. The new tanks are going to run around 1900 each. They charge by gallons , so it is yet to be exactly calculated. I will post more pics as the whole project keeps going.

cig1988 05-27-2007 04:21 AM

Any updates/pics ?


All times are GMT -5. The time now is 03:12 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.