Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   mystique porpose (https://www.offshoreonly.com/forums/cigarette/175652-mystique-porpose.html)

Boomer35 12-18-2007 08:29 AM

mystique porpose
 
I have done a search and read all the forums, can anyone tell me what they know about this problem, what the years where it happened, and if it was notches, stepped, etc...... hulls,

also what speeds did it happen mostly in,

Biggus 12-18-2007 08:50 AM

1 Attachment(s)
The T/S Mystique handles incredibly well. No funny stuff, no issues. This one flat out rocks. Also has a flat transom (no notch)

dreamer 12-18-2007 01:09 PM

only the stepped ones r good

Boomer35 12-18-2007 01:19 PM

dreamer, im looking for a little more info than that, i am very seriously considering looking at 3 mystiques after jan 1, and only one is stepped and of course more $$, the other 2 non stepped

Pantera28TS 12-18-2007 01:26 PM

Biggus, is that Enrique Iglesias's old boat.?? I heard that it rolled on the lake, is that true.??

dreamer 12-18-2007 05:15 PM

yes it rolled and went under.....


dont bother woth the atraight hulls unless u get a deal...

only 3-4 t/s/ mystiques... they should be in th 95k-105 range

Boomer35 12-18-2007 05:54 PM

Dreamer, i think you are missing the point of this thread, i need a little back up, have you been on one, driven one, tried to trim it out, etc........ i have heard from prevoius owners and current owners, im looking to hear from experience and what that expereince was,

thanks-

dreamer 12-18-2007 06:46 PM

was looking at them and almost bought one before i got the playboy.... came real close to the 2002 t/s w/ 496s..... nice boat... but i wanted bigger faster.... should have got it...

i was at 135k no trailer 80hrs in 03...

the 496 boat with some mods could be a 85+ mph boat

i saw 81

Boomer35 12-18-2007 06:55 PM

dreamer, thanks, did you test any non step, i am going to look at a ts 2002 as well, and some non steps, im wondering if the right set up could help the non step, props in ot out, drives, maybe even ext boxes or filling in the notch on the transom

pm203 12-19-2007 08:00 AM


Originally Posted by marylandmark (Post 2376985)
I would think the factory would have tried every thing (fill in notch, prop setups, drives, etc) to cure the porpoise before going through the trouble of redesigning the hull.


..


Don't be so sure of that.


All times are GMT -5. The time now is 06:57 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.