24'ft 1972
 

Looking for the proper X dimension for a 1972 24'ft? Just removed the two inline 6's going with single, bravo setup./DSC00262.JPG

I haven't done mine yet but was going with X plus 1.5" based on comments from Charlie M. at Banana and my experience with my Magnum 25 that I did at X plus 1.625

Thanks for the response, what engine package are you looking to run in your 24? still looking.....

Have a new 383 Mercruiser/Bravo 1 still in the crate.

Once again thanks for the response. Do you have any indication what kind of speed you are looking at with this package, and what is a fair price for this setup? Second did your hull come with the single setup and if so what is the proper stringer dimensions.
Attachment 369228

Attachment 369229

To the best of my knowledge all the teak decked hulls were buit with twins and require the removal of the center stringer and a beefing up of the next two stringers to put in a single. Best guess that the 383 should run low 60's. Price wise should be somewhere under $15,000. Where are you located?

The boat is located in Atlantic City, New Jersey.

Does any one know what the top speed was on my 1972 24ft, twin 165 inline six's...

Anyone know this boat today? I'm interested in the original parts taken off...

Aprox 52mph.
sounds like a nice project, enjoy!

RR.