#3's on a TG
 

Any advise..looking at a new prodject..found a repo with no drives...just the XR gimles...Found well priced 3's...any ADVSE on using the 3's...can it be done or should i look at 2 new XR's:cool:

what year boat??

I assume he's talking about a stepped gun since it had XR's on it. (??)

I don't know of any stepped Guns that had 3's on them.

We have 3A's on our Gun but it's a straight bottom. Love the drives (baby 6's). Plus with a straight bottom the CG is better with the drives forward.

Again, if you're talking about a TS there may be issues with the CG being moved forward.

I had a 2002 with 3a's on it and 750 cobras. it was a nice boat.

A frined of mine has an 02 with 3's on it. It is a totally different boat than with the XR's. Way more stable, but it takes a little more power to get it really fast as the X is a little lower.

If you don't end up buying it. Email or PM the info on it. I have been looking for one.

Or if it is a good enoguh deal, maybe a finders fee.

yeah.............that was a fast and good looking boat. What was the speed again 102 to 104mph??? something like that???...#5's might be a good option??

5's need spacers, but I would love to have one rigged like that.

Jeff, i think the TG with steps has a notch ,,,so no spacers would be needed !!! But the engines need to be moved forward for the tranny's.:eek:

Considering your the guy that told me that we would ned the spacers, what is the real story.

I actually talked to 2 other riggers and they said definately spacers.

His engines are actually moved forward all ready. I think that is what helps make it more stable.

Know it all.

i'll sell my 35' mistress with #3's and 454 efi eng's,,cheap