Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   38 T/s X Dim For #6 (https://www.offshoreonly.com/forums/cigarette/215963-38-t-s-x-dim-6-a.html)

hangem out 2dry 08-31-2009 06:54 AM
38 T/s X Dim For #6
 
Can Anyone Help With The X Dim Of A 38 Ts Gun With #6 Drives.fixing To Start A New Project,repower With Drives
I Know Someone Had To Do This, Can You Give Me A Starting Point? What Is Your Setup?

c_deezy 08-31-2009 07:32 AM
Why not Arneson ASD6's instead of Merc #6's?

Smitty 08-31-2009 08:42 AM
Call Cigarette or Lip-Ship.

blume 08-31-2009 09:06 AM
Originally Posted by hangem out 2dry (Post 2943043)
Can Anyone Help With The X Dim Of A 38 Ts Gun With #6 Drives.fixing To Start A New Project,repower With Drives
I Know Someone Had To Do This, Can You Give Me A Starting Point? What Is Your Setup?
Randy at Cobra Power is one of the only guys that I know that has done this....... he did the yellow one with 1200hp and did the red one with 1050hp. call 305-893-5018

H20 Toie 08-31-2009 10:01 AM
Call Phil first, most of the t/s guns with 6's have issues.
Hot For Teacher is an exception and it handles great. from what i understand it isn't setup any different but it just works better then the rest.

Biggus 08-31-2009 03:25 PM
Originally Posted by h20 toie (Post 2943157)
Call Phil first, most of the t/s guns with 6's have issues.
Hot For Teacher is an exception and it handles great. from what i understand it isn't setup any different but it just works better then the rest.
Why does HFT run better than the other SSM VI boats?

Who rigged it?

jmbtile 09-01-2009 04:38 AM
Originally Posted by Biggus (Post 2943338)
Why does HFT run better than the other SSM VI boats?

Who rigged it?
Nonsense!

hangem out 2dry 09-01-2009 06:23 AM
Jmbtile
Where Are You Running Your Drive Heigth. I Was Told To Run The Center Prop Shaft With Even With The Running Surface Directly In Front Or The Drive?

Jamie B. 09-01-2009 12:38 PM
Originally Posted by hangem out 2dry (Post 2943043)
Can Anyone Help With The X Dim Of A 38 Ts Gun With #6 Drives.fixing To Start A New Project,repower With Drives
I Know Someone Had To Do This, Can You Give Me A Starting Point? What Is Your Setup?
Greek Lightning on here ( Mike ) had one, contact him.

blume 09-01-2009 12:38 PM
Originally Posted by jmbtile (Post 2943731)
Nonsense!
call Randy at Cobra Power. 305-893-5018 He did jmbtile's boat.

jmbtile 09-02-2009 05:15 AM
Originally Posted by hangem out 2dry (Post 2943753)
Jmbtile
Where Are You Running Your Drive Heigth. I Was Told To Run The Center Prop Shaft With Even With The Running Surface Directly In Front Or The Drive?
Call Randy Garciga at Cobra. Boat runs great. Dont really know what the problem others see with 6s on a 38 but I am very happy. He did a great job riggin my boat

HUSTLEthis 09-03-2009 12:01 AM
Originally Posted by jmbtile (Post 2944695)
Call Randy Garciga at Cobra. Boat runs great. Dont really know what the problem others see with 6s on a 38 but I am very happy. He did a great job riggin my boat
Our boat was rigged with 6s from the factory....probably setup by Neil.
I know Randy looked at our boat when it was in Miami in the stacks when he was rigging jmbtile's boat....I'm sure his boat runs just like ours....
You can't go wrong with 6s....IMO


All times are GMT -5. The time now is 04:31 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.