Trs - Konrad
 

:evilb:I'm reriging a 1986 cigarette 35 'mistress I'm going from TRS-KONRADS has any one done this to a MISTRESS just looking to see what kind of speed increase might my customer see if any the boat had 572ci 700hp it ran 75-77mph the boat is getting new power as well 588ci dont no the HP yet it goes to the dyno next week

The standard length Konrad is 1.7" shorter than the TRS. Most installations gain 3-5 mph after the correct prop is found to work with the increase in propshaft height.

Kurt

I gained that when I added the Konrads to my Mistress before I sold the boat last season.

Kurt from Konrad is the man, and I am sure will answer all of your questions.

Plus I was able to use Bravo I 4 blade props, versus the 3 blade mirage plus. The boat even better, which is hard to believe since it is an amazing ride to begin with. Good luck, good decision on going with KONRAD.

Great customer service and good people!

I to have made the switch from TRS to Konrads on my Cafe Racer. I can't actually tell what the speed gain is or is not as I only had the Cafe for a month when the TRS drives blew. All I know is that I don't worry about drive failures like I use to.

The drives sre on and they look real good cant weight for the motors to be done so we can water test the boat

Let us know the results when you get them. The drives do look great on your Mistress.

Herings are the trick with the shorter drive height, The drives are great also.

What size props are ur herings & what do you have for power this might give me an idea where to start we this boat

THANKS JAY

The motors are off the dyno 588ci N/A 775HP 780ftbs I think the boat should go good

Can I come and check out the rigging? I am in the process of restoring a Top Gun and also have plans for the Konrads. I would like to come up and check it out. What zip are you in?