I can work on a supercharged version one I get this one done. I'd be happy to share the files when I get them finished. I may look into getting a batch made up as well if there is some interest.

If the other ones sell, I may be interested in a new set. It may be cheaper if we order together? Do you have the correct diameter for the decals? I'll measure mine tomorrow just to double check. Let me know.

If you could measure, that would be great. They are scalable, so that should be no problem. I still don't think the font for the "SUPER CHARGED, and WORLD CHAMPION" is quite perfect. I'll keep working it. If we order together they should be cheaper. I've never had decals made, so not sure where to start. Here is a draft of the super charged one...

http://forums.rennlist.com/rennforum...estor-copy.jpg

Looks pretty sweet! I wonder if they can put the hole in the center, not sure what it would look like if you try to poke one yourself. It may come out jagged or rip. Also, I would be willing to order 5 just in case I screw one up, as long as they don't cost $100 ea.

I did go ahead & buy Gregs' set, just fyi.

The check went out this morning. http://smiliesftw.com/x/cool.gif

Got a quote for the decals, it looks like they will be in the $15 range. The minimum order is 7, I'm not sure if that can be split between the "Supercharged" and the others, or if we will have to order 7 of each. I would suspect we need to order 7 of each. I have not had time to work on the fonts at all today, but I may have some time tonight.

Frick: Let me know when you get some dimensions.

-Artie

I'll get dimensions tonight after work. If I have to, I'll buy 10 and try to peddle the extras on ebay.

That's pretty much my plan as well for the non supercharged ones. Thanks for measuring!

Here are the measurements. For some reason the outer holes are rotated as shown. I only snagged one spark arrestor off the engine last night. I was checking some pictures and they all seem to be the same. The inner hole could be sized down to .625" and still work. I don't think it needs to be 1".

http://i131.photobucket.com/albums/p...urements-1.jpg

I just sent the four stickers to BLee. If you guy's still need some you may want to contact him. He may have a few extras. The ones he has are the original stickers not copies.