![]() |
shorties on a bullet ????
I have an 89 bullet with a notched transom. It has xr drives on it. I feel like im dragging alot of drive. I leveled the boat on the trailer then i trimmed the drives to make them level. I measured straight out from the nose cone to the bottom of the boat and i got 5" between the center of the shaft and the bottom of the boat. I think i can run shorties any buddy out there with some experiance that can help me. How much prop should be in the water ? Were should my drive shafts be compaired to the bottom of my boat. I wanna no if its even worth my time an money. Any other options besides running shorties ? Any help would be appreciated !!!
|
My buddy ran your boat with you. To be honest there are a few people around our area to help you. PM me and I'll try to help...
|
Your PM box is full.....A couple guys tried them with pretty good results. You give up a little rough water but gain a little speed. Spinning in is faster to but, i thought the handling sucked on mine.
As big and heavy as these bullets are {8900lbs dry} They will never be rockets on a pond but...They will run with the 38s when it's snotty:drink: |
Originally Posted by birdog
(Post 3175689)
Your PM box is full.....A couple guys tried them with pretty good results. You give up a little rough water but gain a little speed. Spinning in is faster to but, i thought the handling sucked on mine.
As big and heavy as these bullets are {8900lbs dry} They will never be rockets on a pond but...They will run with the 38s when it's snotty:drink: |
Hello
Originally Posted by wayne272
(Post 3176123)
How was it getting on plane? I bought a pair of imco -2 shorties for my bullet, but haven't even tried them. I am presently running stock 454 mags but picked up a pair of Hawk 525sc takeoffs. I think the blowers should get me close to 80 ( with a bob madara cam also) so may not even bother with the shorties. Were the handling issues that bad? Mine bullet has no notch.
|
Originally Posted by wayne272
(Post 3176123)
How was it getting on plane? I bought a pair of imco -2 shorties for my bullet, but haven't even tried them. I am presently running stock 454 mags but picked up a pair of Hawk 525sc takeoffs. I think the blowers should get me close to 80 ( with a bob madara cam also) so may not even bother with the shorties. Were the handling issues that bad? Mine bullet has no notch.
Try it..It's easy to do A couple guys tried the Imcos and were happy...I never got around to trying them. I was very happy with how mine ran as it was. |
Wouldnt mind pickin up a couple mile an hour myself over the winter. Im curious about the shorties too! Put those bad boys on and lets git this party started! A bunch of 85 MPH Bullets would be cool...:ernaehrung004:
|
Originally Posted by birdog
(Post 3175689)
Your PM box is full.....A couple guys tried them with pretty good results. You give up a little rough water but gain a little speed. Spinning in is faster to but, i thought the handling sucked on mine.
As big and heavy as these bullets are {8900lbs dry} They will never be rockets on a pond but...They will run with the 38s when it's snotty:drink: |
Originally Posted by 4195
(Post 3176503)
KReed go back and re read this post. "You give up a little rough water but gain speed" That's fine if you stay on the river but in the ocean I don't see it as a benefit. How about boxes on these boats???? Let it ride like a longer boat no? It seems that both rough water handling and speed can be achieved.
|
Yaaa
Originally Posted by kreed
(Post 3176482)
Wouldnt mind pickin up a couple mile an hour myself over the winter. Im curious about the shorties too! Put those bad boys on and lets git this party started! A bunch of 85 MPH Bullets would be cool...:ernaehrung004:
|
Originally Posted by natelee
(Post 3176511)
wouldnt putting boxes on put the drives lower in the water ? would you have to put boxes and shorties on to achieve the goal of gaining speed ?
|
Natlee if speed is what you are after get the Arizona speed updates for those motors I believe they make them 625hp. Someone can chime in here but I think it has a smaller pulley and a ecm update.
|
I spent an hr taking to az speed the other day. The kit your talkin about comes with a smaller pulley takin it to 6 lbs, msd ign., cooler thermostat, and reprogram the computers. Its a $1,000 a side with a gain of 80 hp a side !! I'm just nervous about bumpin up the boost. I'm guessing merc put them were there at for a reason. Or I could just go buy a cat and quit messin around !!! :)
|
Originally Posted by natelee
(Post 3176753)
I spent an hr taking to az speed the other day. The kit your talkin about comes with a smaller pulley takin it to 6 lbs, msd ign., cooler thermostat, and reprogram the computers. Its a $1,000 a side with a gain of 80 hp a side !! I'm just nervous about bumpin up the boost. I'm guessing merc put them were there at for a reason. Or I could just go buy a cat and quit messin around !!! :)
|
I know lots of people that have turned them up with good results I would go for it if it were mine.
|
HI Wayne, are your imco's available for sale?
|
Originally Posted by TELLefant
(Post 4494207)
HI Wayne, are your imco's available for sale?
|
Originally Posted by wayne272
(Post 4494964)
Sorry, long gone.
|
Still looking for some -2 or -3 Imco shorties for B1...
|
| All times are GMT -5. The time now is 02:10 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.