Pictures...pictures...pictures! We need to track the progress.:drink:

Best of luck with the project...been there and done that!!

Bow rail
 

I've tripped on the bow rail a couple times (center mounted) and almost fell off the boat. Maybe I'm just a klutz but I think it's more of a hazard. Randy

Good luck on the project I've done a few it's fun but alot of time. I would do the bildge white its easy to keep clean and if you do get a leak it's easy to spot.

Keep it..... Glad to see your getting to work on it... It will take some time but, Enjoy! It is a fun process...

I've posted these before. Figured I would use this as the official progress thread.

Old transom:
http://i131.photobucket.com/albums/p...e/P1012081.jpg

New transom:
http://i131.photobucket.com/albums/p...e/P1012261.jpg

New drives - (not my image):
http://i131.photobucket.com/albums/p...e/DSC03031.jpg

Next is to detail bilge, paint white and organze the rigging, determine what to replace and what to rebuild (pumps, fuel lines, etc.)

Looks Good! Was the transom rotted out?

Yes, I knew this before I aquired the project. So it was no surprise. This boat should be like brand new when it's completed. Going to start stripping it down to the bare hull in the next couple weeks. I should have a nice sound and safe boat when it's all done.

Is this bad? Maybe just a little soggy.........
http://i131.photobucket.com/albums/p...e/P1012092.jpg

I am actually redoing mine....that's a lot of time (and money...)
But as we have very rough water here I have decided to reinforce all the boat structure (add 2 bulkheads and 6 bones) underneath the liner.
Yes the man has remove all the liner in slices....

How much did u pay for your konrads. Were they new or reco'd? and also, where did u buy them. thanks heaps.