|
for any cafe guys
just wondering, what i could do to get more rpm outa my 2 468 motors? ive been told to try another set of props! i dont no would i could do. any info would be appreciated!
|
How much rpm????? A 2" drop in pitch is worth about 400rpms. Having your current props labbed would gain about 300rpm.
|
Originally Posted by [email protected]
(Post 3276899)
just wondering, what i could do to get more rpm outa my 2 468 motors? ive been told to try another set of props! i dont no would i could do. any info would be appreciated!
|
Probably could use a little more information:
What Drives? What Props are you running? What RPM are you currently seeing? What HP do you estimate you have? |
Originally Posted by seafordguy
(Post 3277031)
Probably could use a little more information:
What Drives? What Props are you running? What RPM are you currently seeing? What HP do you estimate you have? 26bravo 4600@71mph 3000@40-42mph 460each |
Is that 71 on GPS? If so that is cooking with 460HP in my opinion. |
Originally Posted by seafordguy
(Post 3277248)
Well - on a basic level I would say you have too much prop. I run 26 Bravos on my blown 502's (mild blower probably about 575HP).
Is that 71 on GPS? If so that is cooking with 460HP in my opinion. |
Originally Posted by [email protected]
(Post 3277287)
yes in a lite chop me and one other person and 1/4 tank of gas and to be honest with you i might be at about 4700 rpm, if you think thats good enough ill leave it alone just alittle courious
|
Call Brett..........
|
Originally Posted by 4195
(Post 3277018)
Call Brett at BBlades and give him your numbers he will set you in the right direction. My Cafe picked up 3.5 mph. with his prop work.
|
| All times are GMT -5. The time now is 09:31 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.